Major General 2024 Talon 1000R-4 Build Thread

[Hondasxs]

Oh.. turnpro kit.

Mwas there not yellow wires coming off them? What did you hook them too?

Sent from my SM-G996U using Tapatalk

 

[Admin]

 

[Coeus]

What is the pro kit you speak of?
The AUX switch harness i sent you?

If so. Middle should be off. No backlighting.
If up and down are reversed then it may just be the rocker cover was installed upside down.

Sent from my SM-G996U using Tapatalk

Doh… damn autocorrect… the pinoeer kit you sent that had the horn/harzard option

 

[Coeus]

What is the pro kit you speak of?
The AUX switch harness i sent you?

If so. Middle should be off. No backlighting.
If up and down are reversed then it may just be the rocker cover was installed upside down.

Sent from my SM-G996U using Tapatalk

The Aux switch you sent was perfect!

 

[Coeus]

Oh.. turnpro kit.

Mwas there not yellow wires coming off them? What did you hook them too?

Sent from my SM-G996U using Tapatalk

Hooked up left to left but turns on when you click switch to the right

 

[Coeus]

@Hondasxs

 

[Hondasxs]

Same with the rear?

Sent from my SM-G996U using Tapatalk

 

[Coeus]

Same with the rear?

Sent from my SM-G996U using Tapatalk

Correct.. was just about to post that

 

[Coeus]

I can flip the switch over but the writing would be upside down… I probably will just look up how to remove the pins and swap them at the switch

 

[Coeus]

Pins swapped on the connector that the switch plugs into and works as expected

 

[Hondasxs]

Pins swapped and works as expected

Kool what else you got to work on.

Sent from my SM-G996U using Tapatalk

 

[Coeus]

Wrapping up wire routings and installing switches… getting closer

 

[Buggyman]

Pins swapped and works as expected

When I talked to Grant at TurnPro I believe he said if it's backwards switch 2 wires in the rear part of the harness ( yellow /green) ? Glad you got it working

 

[Coeus]

When I talked to Grant at TurnPro I believe he said if it's backwards switch 2 wires in the rear part of the harness ( yellow /green) ? Glad you got it working

Yup that’s exactly what I did… just seems odd was all

 

[Coeus]

Wiring almost 100% wrapped up… everything is ran and either zip tied in or staged for tightening… waiting on a couple plates from Crossroads 3D, whip mounts, and need to pick up screws for mounting Auxbeam

Ground bus bar

Turn pro extra wiring.. not sure what to do with them…

Aux/key-on bus bar controlled by DPDT

Testing that runs to back function. Whips and stereo

 

[Coeus]

Still need to test the rearview mirror camera/backup camera setup for electric setup as well as rear camera placement

 

[Coeus]

Also have the wheels/tires, tree kickers, and front windshield to install.

Lastly remove from a-arm guards for some weight loss surgery and reinstall

 

[Coeus]

Other than that she’s ready to rock… plan to go out on the maiden voyage this coming weekend (if all goes as planned)

 

[JenElio]

Wiring almost 100% wrapped up… everything is ran and either zip tied in or staged for tightening… waiting on a couple plates from Crossroads 3D, whip mounts, and need to pick up screws for mounting Auxbeam

View attachment 429535View attachment 429536

Ground bus bar
View attachment 429537View attachment 429538

Turn pro extra wiring.. not sure what to do with them…
View attachment 429539

Aux/key-on bus bar controlled by DPDT
View attachment 429540

Testing that runs to back function. Whips and stereo
View attachment 429541View attachment 429542View attachment 429543View attachment 429544

Looking good General 👍 Did you run some extra wires front to back for future shît?

 

[JenElio]

Still need to test the rearview mirror camera/backup camera setup for electric setup as well as rear camera placement

Which one did you get, I've been wanting to do this for a while

 

[Coeus]

Looking good General 👍 Did you run some extra wires front to back for future shît?

Naw.. i thought about it but undoing the center console wasn’t too bad.. only thing I’d run is rear lights