CP’s Talon Rebuild

[Adam490]

View attachment 322371

Best part was me driving it with you scrubbing the windshield the whole time because we couldn't see s***. "snuff should I slow down?"...."I don't know, everything's fine"...

 

[Admin]

 

[Adam490]

@CumminsPusher you'll probably be okay with those sliders... This was after 3 days in Tackett on pretty much everything but No Business and Hell's canyon.

Really the only damage and that was a serious whack. Me and @Frogtown went on a couple adventures the rest of the crew decided against

 

[snuffnwhisky]

@CumminsPusher you'll probably be okay with those sliders... This was after 3 days in Tackett on pretty much everything but No Business and Hell's canyon.

View attachment 322373

Really the only damage and that was a serious whack. Me and @Frogtown went on a couple adventures the rest of the crew decided against

Tree kicker or frame?

 

[Adam490]

Tree kicker or frame?

That's the satv nerf

 

[CumminsPusher]

@CumminsPusher you'll probably be okay with those sliders... This was after 3 days in Tackett on pretty much everything but No Business and Hell's canyon.

View attachment 322373


Really the only damage and that was a serious whack. Me and @Frogtown went on a couple adventures the rest of the crew decided against

That’s a decent ding right off the bat, ya they’ll get torn up fast, hopefully not as fast as side bars on Pioneer.
I was thinking about filling them with expanding foam. Done that on a few things and it definitely helps but just gunna run em

 

[snuffnwhisky]

That's the satv nerf

Was hoping that wasn't frame rail. They bend allmost like a pioneer and not replaceable.

 

[Adam490]

Was hoping that wasn't frame rail. They bend allmost like a pioneer and not replaceable.

We've been recycling cans for a while, can probably make a patch

 

[snuffnwhisky]

We've been recycling cans for a while, can probably make a patch

Twice

 

[CumminsPusher]

Was hoping that wasn't frame rail. They bend allmost like a pioneer and not replaceable.

That’s why decided on skid immediately this time. They suck bolting up to damaged crap.

 

[Adam490]

That’s why decided on skid immediately this time. They suck bolting up to damaged crap.

Battle tested mine last weekend and it still only has those scratches @SuperATV put in it before I installed it...

 

[CumminsPusher]

Good morning @Farmer

 

[Farmer]

Good morning @Farmer

LOL!!! Mornin CP!!!!

 

[Todd627]

Good morning @Farmer

 

[CumminsPusher]

View attachment 322441

Bhahahahaha. s***s getting old, I’ll leave it this time🤣

 

[CumminsPusher]

Thank you @sspeederr. Received both mine and a friends relocation kit today. Be on that right away.

 

[sspeederr]

Thank you @sspeederr. Received both mine and a friends relocation kit today. Be on that right away.

View attachment 322509

glad i could help enjoy

 

[CumminsPusher]

Couldn’t get a dash but just couldn’t leave it looking like s*** till I did get one. Repairing multiple spots but latch area was really broken up and missing a big section.
Looked around and closest plastic type and thickness was inside of one of my old Dodge inner glove box so that’s what I used.
Cut it to fit, heated up to get a couple bends and traced latch hole on passenger side to get it right. Used fiberglass mat and a two part panel bond on backside. Letting it fully cure tonight and I’ll bevel the face cracks then bodywork and paint in the morning.
Sucks to fix but gotta do what gotta do.

.

 

[Eltobgi]

Couldn’t get a dash but just couldn’t leave it looking like s*** till I did get one. Repairing multiple spots but latch area was really broken up and missing a big section.
Looked around and closest plastic type and thickness was inside of one of my old Dodge inner glove box so that’s what I used.
Cut it to fit, heated up to get a couple bends and traced latch hole on passenger side to get it right. Used fiberglass mat and a two part panel bond on backside. Letting it fully cure tonight and I’ll bevel the face cracks then bodywork and paint in the morning.
Sucks to fix but gotta do what gotta do.

View attachment 322569



View attachment 322571
.

View attachment 322572

Nice work!

 

[CumminsPusher]

Finished the cracks and big hole in the dash. Not my best work but it’s usable, not near as obvious.
Rest of the dash is repaired, there were a ton of mounts yarded off.

 

[CumminsPusher]

Got the cluster relocation kit in. Not sure why I had to extend wire for mode switch but did. Moved the switches tried everything could with routing but in the end extended it. Probably got a switch or harness that’s just a bit short.
Since I lengthened it I went ahead and lengthened the launch mode because it was tighter then I’d want. Then obviously the required power outlet.

Sanded the printer lines off and painted blue to give it a little bling. Also painted the Talon dash cover while I was at it.