Jankyeye
Well-Known Member
Lifetime Member
SATV Atlas pro front A arms installed, just need to do an alignment….and order some wheels and tires.
Coeus
Major General
Lifetime Member
Those are on my list to do eventually
M
Added an under seat fan to keep the heat out.
It's mounted from the trans housing, and I'm currently using some zip ties to stabilize it
I used the tabs on the trans to mount the fan, I just bolted it in place and used a small piece of 1/4" fuel line as a spacer.
Still allows easy access to the filler cap for oil changes. I may try to replace the zip ties and make a strap using some metal hanger strapping that's used for ducting, but the zip ties are great as you easily add additional tension to stabilize fan
It's mounted from the trans housing, and I'm currently using some zip ties to stabilize it
I used the tabs on the trans to mount the fan, I just bolted it in place and used a small piece of 1/4" fuel line as a spacer.
Still allows easy access to the filler cap for oil changes. I may try to replace the zip ties and make a strap using some metal hanger strapping that's used for ducting, but the zip ties are great as you easily add additional tension to stabilize fan
Scoop
Well-Known Member
Lifetime Member
Supporting Member
Mounted the farm jack to the SATV rear tire carrier and added some snaps to my rear mesh panel.
Also, drained and filled the front and rear diffs (Mobil 1 75W-140 Synthetic).
Also changed the oil, filter and front & rear diff service on the '14 Grizzly 700 EPS. Now all three machines have had fresh oil changes and diff service completed in the last month and a half.
Also, drained and filled the front and rear diffs (Mobil 1 75W-140 Synthetic).
Also changed the oil, filter and front & rear diff service on the '14 Grizzly 700 EPS. Now all three machines have had fresh oil changes and diff service completed in the last month and a half.
C
Hot springs ORV park action. 
Rocks sliders Super ATV, skid plate and fox shocks. Bike felt so much better this year on the trails.
Sent from my iPhone using Tapatalk
Rocks sliders Super ATV, skid plate and fox shocks. Bike felt so much better this year on the trails.
Sent from my iPhone using Tapatalk
J
Got the seat covers installed. Not much, but its something.
C
First round cleaning….. done. Will follow up with next 2 rounds.
Sent from my iPhone using Tapatalk
Smitty335
Well-Known Member
Lifetime Member
Supporting Member
What a mess, base gravel road and rain?
P1K5Dave
Well-Known Member
Lifetime Member
Club Contributor
Looks like you drove thru a cement plant. What are you showing with the seat off? @chucksmith0706
advertisement
C
Just cleaning her up in all areas. Nothing special. Just wanted to make sure I cleaned under seat and motor area. You are correct wet cement area. Was a good ride though, bike performed so much better this year. Shocks, skids, and Super ATV sliders worked so well.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Dirtstiffs-1000
Well-Known Member
Lifetime Member
Supporting Member
- Nov 3, 2018
- 1,657
- 6,034
- 113
- Ownership
-
1000-5
That's one reason I did an enclosed trailer.
P
Holy $hit, thank goodness for my enclosed trailer. We hauled a few quads back to Colorado several years ago on an open trailer ........they looked a lot like your machine except for the extra layer of mud we had on everything ..........
P
You'll love it, i'm on my second enclosed trailer build and there a fun project. 8.5 X 16 V nose is just about right .....
GovtMule
NTC’s SoA, Chief Sarcasm Officer-Self Appointed
Lifetime Member
Pretty sure that’s just foam from his foam cannon…washing round one. Sorta like this.
P
Gotcha @GovtMule, looked a little closer and see the foam now.
P
Got tired of getting my retinas burned out by the morning and evening sun through my windshield, my son in law does some window tinting on the side for friends and family so I had him do the top 6" +/- of my windshield. I'll try to get a pic posted in a bit and will report back. Heading for Nevada thursday to help a pal on his bull hunt so should know if it works or not.
Last edited:
P
This is what we thought might be a good level for the tint, we'll see soon enough but may be a little low for my liking ....... The enclosure is Alumalite Armour and it is bad ass with the full tip out windshield. Highly recommend it if you can swing it, and Troy is a super dude ....
D
Man the visibility on that thing looks horrible, not from the tinting but the aluminum frame around the glass. Lots of blind space!
advertisement
Similar threads
- Crfdell
- General Pioneer 1000 Discussion
P1000
Pioneer 1000-5 wont idle
- Captain1989
- General Pioneer 1000 Discussion
P1000
1000-5 Krypton Green
- Spicolli1864
- General Pioneer 1000 Discussion 2