Major General 2024 Talon 1000R-4 Build Thread

[Coeus]

Was thinking the same thing while doing 4 point harness install.

You have been forewarned..

 

[Admin]

 

[Coeus]

Continued electrical work today.. maybe some fender extender install as well

 

[Coeus]

Definitely a huge PIA trying to install the speaker in the back rops. Used bungie and clamps to help out and still had to loosen back windshield…

 

[Coeus]

Moved onto the Rokblokz… passenger front side on… as usual, a PIA… one of the fasteners wouldn’t tighten down… but seems like the rest are snug . Kreg clamps came in handy

 

[Coeus]

Finished the rear Rokblokz…

Couldn’t get this gap closed on either side so not sure if that is normal or not

View of both front and back

will finish the driver side once I get all the electrical run on that side (easier to access with the panels off)

 

[Backwoods]

Your making good time on this. I will admit I had doubts about anything being done but I’m impressed

 

[Coeus]

Any thoughts on this location for front turn signals? Didn’t find anything for 2023+ when searching the forum or interwebs.. not a whole lot of location options either

 

[NTCPrezJB]

Any thoughts on this location for front turn signals? Didn’t find anything for 2023+ when searching the forum or interwebs.. not a whole lot of location options either

View attachment 428790View attachment 428791

I’d say the that looks about as good as anything you could do with them. Nomo

 

[Backwoods]

I’d say the that looks about as good as anything you could do with them. Nomo

Agree with you

 

[Coeus]

I’d say the that looks about as good as anything you could do with them. Nomo

Yea after putting them on and sitting for awhile, seems like the best option… most other places are too small or have things behind them in the way

 

[Coeus]

Started to work on mount for electrical stuff.. guess it’s now a true build thread 🤷‍♂️

 

[NTCPrezJB]

Started to work on mount for electrical stuff.. guess it’s now a true build thread 🤷‍♂️

View attachment 428811View attachment 428812View attachment 428813

If that’s the rear section of the P1K5 LE aluminum skid, that’s exactly what I’m using for my electrical. 🤣🤣🤣

 

[Coeus]

If that’s the rear section of the P1K5 LE aluminum skid, that’s exactly what I’m using for my electrical. 🤣🤣🤣

Good eye.. I knew hoarding that would come in handy.. I made it a point to point that fact out to the Mrs

 

[Mopower58]

Could you put windows in my cardboard house? 🤣 Thanks!

 

[-Bear-]

Any thoughts on this location for front turn signals? Didn’t find anything for 2023+ when searching the forum or interwebs.. not a whole lot of location options either

View attachment 428790View attachment 428791

That doesn't look bad at all. I could not find any examples or templates for the 2023 and newer so I ended up doing this

 

[Coeus]

That doesn't look bad at all. I could not find any examples or templates for the 2023 and newer so I ended up doing this

Yea I think the Bosman bumper will cover that area up… I know that Tram put his in the bumper but I didn’t like the location (plus it looks like it was the previous style)

 

[Remington]

Any thoughts on this location for front turn signals? Didn’t find anything for 2023+ when searching the forum or interwebs.. not a whole lot of location options either

View attachment 428790View attachment 428791

Looks like a good spot to me. I put mine in a similar location. Biggest issue putting then too far in front, if u get a brush guard or any aftermarket bumper they will get covered up.
Hard to see in this pic. Mine is 21’ tho. I have the one on the side like yours. People do tell me they see them clearly.

 

[Coeus]

Looks like a good spot to me. I put mine in a similar location. Biggest issue putting then too far in front, if u get a brush guard or any aftermarket bumper they will get covered up.
Hard to see in this pic. Mine is 21’ tho. I have the one on the side like yours. People do tell me they see them clearly.
View attachment 428871

Thanks! Yea that’s the challenge plus the newer years don’t have that same spot available where you have the two together

 

[Remington]

Thanks! Yea that’s the challenge plus the newer years don’t have that same spot available where you have the two together

Yeah I see that fo sho.
I like where u have your stickers. I think thats a great spot. Gives u room for other improvements u dont have to worry if they will be in the way

 

[JenElio]

Yea I think the Bosman bumper will cover that area up… I know that Tram put his in the bumper but I didn’t like the location (plus it looks like it was the previous style)

I don't know what the Bossman bumper you got going in looks like.........and it's not my money 🙂 but, I like the looks of the "fang style" lights with the turn signal/DRL set up. Even though it resembles a poopoo they look pretty cool....