P1000m5 What did you add to/do with your Pioneer 1000 5 today?

[Smitty335]

I also thought the same about the mini skirt version some have hose clamped directly to the intake hole as prefilter.
Don't want a snorkel.
JMO

I don't want a snorkel either.

 

[Admin]

 

[chucksmith0706]

Great points I didn’t even think of that actually. I try and not ride any deep water. I’ll look at turning hose now. I also have some small sheet of ABS I could fab up a cover. I like the idea of having a pre filter. More to come. Thanks for help and information/ideas.

 

[rmking34]

Thanks

Where can you buy? Don't see on web site? I am probably at wrong site thank you!

 

[JenElio]

Where can you buy? Don't see on web site? I am probably at wrong site thank you!

I don't know what or who you're asking but you have to "tag" the person you're wanting to hear from in order for them to notice your question. Example....@NAME or just simply reply to their message and ask away.

Good luck 👍

 

[rmking34]

Added the dynojet, ran the cable to the hood, the mounted it to the steering column. View attachment 388787

Where can i buy the PV3 holder?

 

[DawgU]

View attachment 398722

DIY heat shield I assume??? That looks a lot better than the DEI Heat Shield I bought!!!

 

[Dirtstiffs-1000]

DIY heat shield I assume??? That looks a lot better than the DEI Heat Shield I bought!!!

Yes, DIY,
I bought a roll of automotive heat reflective material and a Walmart window shade.
Rolled them out on the garage floor, laid the seat on top and traced the shape, cut them out with good shear scissors, and it works pretty well.
Also installed a blower under the seat.
Good luck

 

[Scoop]

That's my next/last step. If the Berryman Seal-r works, I'll let it be and just buy something different when the time comes. By the time I deal with dismounting, returning, mounting, balancing, and all that mess, it's not worth the hassle.

It's been five days and the tires that were s-l-o-w-l-y leaking down (very visibly) within 3-4 days seem to be holding after adding the Berryman Seal-r and driving around about ~10 miles before parking the P1K5. Gonna give it a few more days before I dare to feel confident and check the pressures.

 

[Scoop]

What did I do with my Pioneer 1000-5 today?

Oh, I used it to help make a made a minor adjustment to my pontoon boat after a bit of bad weather rolled through here late Friday night:



Putting Piney to work. The two guys on the barge spent damn near 3 hours screwing around and could not get it past vertical. I told them to hold on while I hooked up the winch and pulled it over.

 

[Caper]

I don't want a snorkel either.

If my ass gets wet, it's too deep. 😊
Caper

 

[Caper]

It's been five days and the tires that were s-l-o-w-l-y leaking down (very visibly) within 3-4 days seem to be holding after adding the Berryman Seal-r and driving around about ~10 miles before parking the P1K5. Gonna give it a few more days before I dare to feel confident and check the pressures.

My Blackwaters had leaks from the start. I took it back to pro cycle and told them they had to resell them around the rim. Three didn't leak, left front did . Not a lot but did. I took it back 3 more times and they would put the tire in the tank , and surprisingly no leaks. But overtime, it leaked. I had it in for service and asked them to resell it. A young guy put it in the tank and said all low pressure tires leak a little. I said you go on the floor every week and fill the tires on the new bikes. No answer. So I asked why he didn't do what I asked to service. They made him take off the tire and resell it. No leaks. I know because he put the Tigre on backwards, with the yellow Blackwaters inside. Hard to get good help.
Caper

 

[chucksmith0706]

Super ATV sliders/Kickers



Shocks

Skid install.


Sent from my iPhone using Tapatalk

 

[chucksmith0706]

Oil change and goodies.


Sent from my iPhone using Tapatalk

 

[P1K5Dave]

What did I do with my Pioneer 1000-5 today?

Oh, I used it to help make a made a minor adjustment to my pontoon boat after a bit of bad weather rolled through here late Friday night:

Was that upside down? How could that happen?

 

[Scoop]

Was that upside down? How could that happen?

80MPH+ straight line winds and/or the tornado that touched down nearby.

 

[Moxdmguy]

Changed out rear winch to a Warn Axon 55-s and modified my skid plates to work with the TTC rock sliders….

 

[Dirtstiffs-1000]

Pulled off the Sheepherder (Farm) jack and replaced it with a Tusk scissor jack.
Figured it'd rarely get used anyway, so why not drop a few pounds and create more space. The farm jack was easier to un mount and mount.
I'm coming off major gut surgery and haven't got my core strength back.
Cheers!

 

[DawgU]

Changed out rear winch to a Warn Axon 55-s and modified my skid plates to work with the TTC rock sliders….

View attachment 400887 View attachment 400888

Which skid plates do you have?

 

[Moxdmguy]

Which skid plates do you have?

SATV skid plates.

 

[Dirtstiffs-1000]

View attachment 400830
View attachment 400831
Super ATV sliders/Kickers
View attachment 400832
View attachment 400833
View attachment 400834
Shocks
View attachment 400835

Skid install.


Sent from my iPhone using Tapatalk

Dam, nice lift.