P1000 Water in transmission oil

[Neohio]

Oil (left) first sub-trans oil change. Oil from third oil change (right). Using Shell Rotella T-6 oil. Will this clear up with more changes? Suggestions?

View attachment 438765 View attachment 438766 View attachment 438767

Subtrans is a sealed component. Make sure the breather line is clear of obstruction. Maybe even extend it to the roof line.

It will clear up the more you drive it and change it.

 

[Admin]

 

[CID]

Oil (left) first sub-trans oil change. Oil from third oil change (right). Using Shell Rotella T-6 oil. Will this clear up with more changes? Suggestions?

View attachment 438765 View attachment 438766 View attachment 438767

Note that if there's frost on the outside of your engine, there's frost on the inside; that's why it's so important to get them up to full operating temperatures - to burn off the condensation. The colder or more humid your environment, the more important this becomes. In really cold temps, you should be blocking off your radiator until the fan starts cycling normally. You'll have to experiment with how much blockage for your area and temps. eta: you don't need frost to have internal condensation.

 

[Dirtstiffs-1000]

Based on the photos, I'd flush again and add a teaspoon of Moly paste if mine.
Also buy @Bayouownbeer extension kit.

 

[White Rabbit]

Extend your vent lines. Fuel tank may have water as well if your sub does they both vent into same location. I sell easy to install kit talked about on this forum.

Can you provide a link to extension kit?

 

[Rayger143]

Can you provide a link to extension kit?

@Bayouownbeer

 

[Bayouownbeer]

@Bayouownbeer

TY I messaged hem.

 

[Bayouownbeer]

Can you provide a link to extension kit?

Message me for better deal than on eBay. Here are the links

Honda SXS ACC link



This is the vent extension kit thousands of members have used. Includes everything needed to extend all 6 vents with black tubing. No sourcing out parts or multiple trips to the hardware. This includes first class USPS shipping. Instructions and tracking will be emailed.



BLACK TUBING ITS HARLY NOTICEABLE IF IT’S RUN RIGHT



Screen shot Reviews on my page in the feed



https://m.facebook.com/Hondapioneer1000seatheatsolutions/



Vent extension kit without filters recommended for 5 seater. Filters not needed your preference. Simple hour install. Great piece of mind knowing your covered.



THE ORIGINAL Honda Pioneer 1000-5&6/700/500, Talon Vent Ext. Kit Without filters | eBay



With filters recommended for 3 seater pioneers and the Talon. If you don’t heavy mud you can use the kit without filters and simply turn the ends down 90 degrees.



THE ORIGINAL Honda Pioneer 1000-5&6/700/500, Talon Vent Ext. Kit. With filters. | eBay



Both heat shields and vent kits package without filters



Honda Pioneer 1000-5&3 Heat Shield's 1&2 + Vent Extension Package Without Filter | eBay





With filters



Honda Pioneer 1000-5&3 Heat Shield's 1&2 + Vent Extension Package With Filters | eBay



Just heat shields. This material is construction grade material very thick 5/16” and durable. Fire class 1 rating



Honda Pioneer 1000-6,5 & 3 Seat heat Shield Part 1 and part 2 | eBay

 

[White Rabbit]

Based on the photos, I'd flush again and add a teaspoon of Moly paste if mine.
Also buy @Bayouownbeer extension kit.

Moly paste? Have not used before, please elaborate on product name and uses

 

[Dirtstiffs-1000]

If your not familiar, flush and fill with oil would be good enough.
Your favorite oil, likely has a % Moly already added.

By definition -
Honda Moly Paste
Moly coatings lubricate sacrificially by transferring lubricant between the two mating surfaces, which helps to reduce wear and coefficient of friction. Molybdenum Disulfide (MoS2) coatings are a dry film lubricant.