P1000m5 Traveller II

[ohanacreek]

I found this stick jammed in the wheel well after yesterday's ride.

Judging by the skid marks, it looks like it could have punched thru the floor. There's an impact mark on the UHMW where it hit. I'd like to think it saved the floor and possibly @ohanacreek legs!

View attachment 29956

That's what the sound was....

 

[Admin]

 

[nbomar]

Did you just cut a piece of uhmw flat and bolt it to the fender floor area? My skidplate doesn't cover the fender areas...

 

[ErikHonda4Life]

I found this stick jammed in the wheel well after yesterday's ride.

Judging by the skid marks, it looks like it could have punched thru the floor. There's an impact mark on the UHMW where it hit. I'd like to think it saved the floor and possibly @ohanacreek legs!

View attachment 29956

That's how you ride, fast and hard!!

 

[JTW]

That's how you ride, fast and hard!!

Not the first time I've been described that way!! How about you Joey? Lmao!!

 

[joeymt33]

I was riding the other day with Ohanacreek and one of my friends named Jonathan Payne.

There were several occasions where we were rubbing up against trees in tight turns and Jonathan recommended some UHMW skid plates on the roof.

So, I call these Payne Strips. Super cheap and easy to install. They should keep the factory hardtop from wrinkling anymore than it already has.

 

[joeymt33]

Now on to the next project.....

 

[JTW]

I was riding the other day with Ohanacreek and one of my friends named Jonathan Payne.

There were several occasions where we were rubbing up against trees in tight turns and Jonathan recommended some UHMW skid plates on the roof.

So, I call these Payne Strips. Super cheap and easy to install. They should keep the factory hardtop from wrinkling anymore than it already has.

Awesome!! I really like that idea! Did you run those into the rops?

 

[joeymt33]

Awesome!! I really like that idea! Did you run those into the rops?

Just riveted to the roof only.

 

[joeymt33]

Here's a Trail Armor update. I have broke my second piece of UHMW from them. They replaced it free of charge last time. Hopefully they will this time. It breaks at the joint where they've thinned it to overlap.

 

[ohanacreek]

Here's a Trail Armor update. I have broke my second piece of UHMW from them. They replaced it free of charge last time. Hopefully they will this time. It breaks at the joint where they've thinned it to overlap.

I put a piece of 3/16 aluminum behind each joint on mine but they weren't thinned to overlap. Not sure if it'd help?

 

[joeymt33]

Just in case anyone missed it, here's a link to the power commander review.

Power commander V

P1000 - Power commander V

 

[joeymt33]

Between the 30 inch Roctanes, extra weight from all the accessories, and now the added power, I guess I'll find out just how strong these clutches are. I actually think that 1500 miles with the abuse that I've put on them, they're actually not that bad.

 

[Delton]

I was riding the other day with Ohanacreek and one of my friends named Jonathan Payne.

There were several occasions where we were rubbing up against trees in tight turns and Jonathan recommended some UHMW skid plates on the roof.

So, I call these Payne Strips. Super cheap and easy to install. They should keep the factory hardtop from wrinkling anymore than it already has.

I'd actually considered making some mini rock sliders for the top of the rops but I like this much better. Great idea!

 

[Delton]

Now on to the next project.....

Did you get a wideband too? To keep an eye on those afr's?

 

[Delton]

Did you get a wideband too? To keep an eye on those afr's?

Nevermind, seen where you also have autotune. Great review.

 

[Delton]

I wish there was an autotune available for the AEM fic in my Neon. Wot is easy to tune but partial throttle under boost is a flat out b*tch. Next time we ride together we gotta line em up. Getting my arse handed to me should make up my mind to get one lol.

 

[DGann]

Between the 30 inch Roctanes, extra weight from all the accessories, and now the added power, I guess I'll find out just how strong these clutches are. I actually think that 1500 miles with the abuse that I've put on them, they're actually not that bad.

If it can your driving @joeymt33 than it must be good


Sent from my iPhone using Tapatalk

 

[Delton]

We need some scales. Only one I know of close is at Huntsville dragway.

 

[X4Dice]

View attachment 25875

View attachment 25876

View attachment 25877

View attachment 25878

how did you attach the strings that go over your roof?

 

[joeymt33]

how did you attach the strings that go over your roof?

I drilled a hole over the roll cage and let the string go straight down and tied it around the roll cage.

Give it a little dot of black RTV and you'll have nothing to worry about.