JayPo's 2024 Talon 1000R

[JayPo]

Installed Nerf Bars aka Tree Kickers aka Rock Sliders from SuperATV

 

[Admin]

 

[JayPo]

Installed Frame Stiffener from SuperATV

 

[Backwoods]

Installed Nerf Bars aka Tree Kickers aka Rock Sliders from SuperATV

View attachment 436741

View attachment 436742

Those look good IMO JayPo

 

[Backwoods]

I appreciate your promptness in your install unlike someone I won’t name as a courtesy 🤣🤣🤣🤣

 

[Mopower58]

Don’t forget to tighten all the lug nuts and wheel spacers if applicable. 😜😜🤣🤣

 

[JayPo]

Don’t forget to tighten all the lug nuts and wheel spacers if applicable. 😜😜🤣🤣

Not applicable on the Talon. It has auto tightening lug nuts so I should be good 👍

 

[Mopower58]

Not applicable on the Talon. It has auto tightening lug nuts so I should be good 👍

This new engineering is amazing!

 

[JayPo]

Skid plate is installed. I really hate self tappers. The 2 on the very front are not long enough because the front skid plate is not bent at big enough angle and I also have the frame stiffener. I'll have to figure something out there 🤷‍♂️

 

[JayPo]

SuperATV Hitch Receiver Installed

 

[EMAW]

SuperATV Hitch Receiver Installed

View attachment 436775

What’s your plans for lwr radius rods?

 

[TripleB]

What’s your plans for lwr radius rods?

Nothing. He's gonna watch them do this like @Ohio4x4 did. Back to back days lol.

 

[JayPo]

What’s your plans for lwr radius rods?

🤷‍♂️ I can't afford any more stuff.

 

[JayPo]

View attachment 436776View attachment 436777
Nothing. He's gonna watch them do this like @Ohio4x4 did. Back to back days lol.

I'm counting on Honda beefing them up on the 2024 model 🤣.

 

[Ohio4x4]

Skid plate is installed. I really hate self tappers. The 2 on the very front are not long enough because the front skid plate is not bent at big enough angle and I also have the frame stiffener. I'll have to figure something out there 🤷‍♂️

View attachment 436754

Bolt it on good. I've had mine peel loose a few times. At the takeover it tore a chunk off that front edge.

 

[Ohio4x4]

View attachment 436776View attachment 436777
Nothing. He's gonna watch them do this like @Ohio4x4 did. Back to back days lol.

Threw me right under the buss. That ride was hell on the machine I tore up everything.

 

[Coeus]

More stuff arrived
View attachment 436740

Which tires?

 

[Coeus]

Threw me right under the buss. That ride was hell on the machine I tore up everything.

Every ride for you is hell..

 

[JayPo]

Which tires?

Idk. I'll see when I unwrap them 🤔

 

[906UP]

Skid plate is installed. I really hate self tappers. The 2 on the very front are not long enough because the front skid plate is not bent at big enough angle and I also have the frame stiffener. I'll have to figure something out there 🤷‍♂️

View attachment 436754

Drill and tap for a 6mm bolt, the brace is plenty thick enough. That's what I did on D2.0

 

[JayPo]

Drill and tap for a 6mm bolt, the brace is plenty thick enough. That's what I did on D2.0

Right now I'm trying to heat the UMHW skid and bend it to the correct angle but it's stupid thick (1/2") so I don't know if it'll work. If this doesn't work then I'll probably just do what you suggested.