S
Thank you for all that replied with some great ideas! We recently had a Fab shop open up in my town and the guys there do a ton of off-roading with their kids. I'm sure they can add to the solutions already offered. Thank you!
Has anybody run a center Harness that would be used for a kid?
I dont think this would work for a small child. I think you would have to add a headrest to this bar to keep a small passenger from hitting there head. If your talking forward facing carseat, this would be a great spot to tether the top of the seat.
Thank you guys for all of the feed back! We will be providing a 12" Piece of foam pipe insulation that will fit the diameter of the tube on the harness bars for the center seat. That way youll have the option of using it to pad the center section. The Driver and Passenger side of the bar doesn't stick out passed the back or head rest.
easy to make one on a clamp that can be adjusted in heights for smaller or bigger passengersWhy not make a center headrest mount that is lower an option for buyers?
Good for you Moses!Thank you guys for all of the feed back! We will be providing a 12" Piece of foam pipe insulation that will fit the diameter of the tube on the harness bars for the center seat. That way youll have the option of using it to pad the center section. The Driver and Passenger side of the bar doesn't stick out passed the back or head rest.
easy to make one on a clamp that can be adjusted in heights for smaller or bigger passengers
READY FOR POWDER COAT! View attachment 90178
199$ Free shipping www.brickcityfab-Az.comHow much shipping and all ?
Sent from my SM-G930U using Tapatalk
199$ Free shipping www.brickcityfab-Az.com
Do these fit the 1000-3 and the 1000-5?199$ Free shipping www.brickcityfab-Az.com
Seeing that the B pillar is the same on both. I would tend to believe this bar fits both. I'm sure @Moses could confirm 100%. But I would say they do.Do these fit the 1000-3 and the 1000-5?
CorrectDo these fit the 1000-3 and the 1000-5?
I need one of those...if anyone needs spare headrest to add to theres let me know I have a bucketfull
Yes Its BCF-10- at check out for 10% OffIs there a discount or club code for these @Moses?
@Moses, Can you look into supplying longer hardware holding the clamps together? Maybe switch from SS to zinc plated steel?Yes Its BCF-10- at check out for 10% Off
will do thanks for the feedback!@Moses, Can you look into supplying longer hardware holding the clamps together? Maybe switch from SS to zinc plated steel?
I barely had a single thread engagement when I installed mine. I swapped the 8 screws out for 1/4"-20x3/4" zinc plated socket head cap screws. I was not comfortable using the screws supplied.
I ordered the 100 pack from McMaster If you need the part number, I can dig for it.will do thanks for the feedback!