P1000m5 Windrock1000- She’s still sexy!

[Smitty335]

I did too 16 months ago.

OW crap!

 

[Admin]

 

[Windrock1000]

They are tough to get greese into. I've only been able to get it to take greese twice.

The upper took a little each time.

 

[Smitty335]

The upper took a little each time.

Think Super ATV needs to be addressed on this issue and send us all an angle drill free of charge! HA!

 

[ohanacreek]

I wish. Upper a-arm (front) mounting tabs. Superatv bushings and inter sleeve seized on bolt. Bolt became piviot point. Bolt cut 20% in too. Get grease in arms boys and girls. I thought the bushings where wore out not so. Bolt was tight.

I have some washers sitting on the workbench ready to weld on the rear upper a-arm holes and new bolts. Mine were worn but not quite that bad.

I drilled as small of a hole as I could in the center of each bushing to let grease make its way to the bolt and an going to fill each one with Marine grease until it comes out both ends.

Lighting got our house twice in the last two months I just swapped out tech for the second time, this time I doubled the surge protection, so the Pioneer has been in the garage waiting patiently to get repaired.

 

[Delton]

They are tough to get greese into. I've only been able to get it to take greese twice.

You got that right! I've made numerous attempts with my electric gun with no success. Gonna swap out zerts with the lockable kind to keep hose from blowing off.

 

[Plumber32]

The upper took a little each time.

How did you realize it was seized? Noise?

 

[Windrock1000]

How did you realize it was seized? Noise?

Squeaky and front end slap. Loose!

 

[Plumber32]

Squeaky and front end slap. Loose!

I checked mine all over again. Still good to go. But then again I don't get drunk and abuse my machine.

 

[Smitty335]

I checked mine all over again. Still good to go. But then again I don't get drunk and abuse my machine.

What do you call it then,

 

[Plumber32]

What do you call it then,

Numbing up my inner demons!

 

[Smitty335]

Numbing up my inner demons!

I can see it!

 

[Windrock1000]

The repair!

Check your wheel bearing! Lift the front tires off the ground and see if the tire will move. Both fronts going. Changed one. All I had in stock. 20 Ton press popped it right out.

 

[BWAF]

View attachment 83716 View attachment 83719 View attachment 83720 View attachment 83721 View attachment 83722 The repair!

Check your wheel bearing! Lift the front tires off the ground and see if the tire will move. Both fronts going. Changed one. All I had in stock. 20 Ton press popped it right out.

Beefy, should last a long time

Sent from my SM-G930U using Tapatalk

 

[Windrock1000]

Beefy, should last a long time

Sent from my SM-G930U using Tapatalk

Not pretty but strong!

 

[BWAF]

Not pretty but strong!

Pretty enough looks like you did a fine job

Sent from my SM-G930U using Tapatalk