I was accessorizing my new P520 at the dealership yesterday and had to decide on a plow width. 66" vs 60". The 60" plow seems to be fine if you are keeping the stock tires and not putting spacers on the P520. I plan to put 1.5 inch spacers and larger tires on mine. So I will go from 50" wide to maybe up to 56" wide once I make the changes. The KFI blade pivots 25 degrees, and I tend to do most of my plowing with the blade angled. I don't want my tires wider than my plow path.
So I went into my way back machine and tried to do some high school trigonometry. I'm posting my results here in case anyone wants to dispute it, or if someone else finds it useful.
When pivoted 25 degrees... (rounding off to nearest inch)
A 66" wide plow cuts a 60" path.
A 60" wide plow cuts a 54" path.
Any math geeks out there want to confirm or dispute?
I ordered the 66" plow.
So I went into my way back machine and tried to do some high school trigonometry. I'm posting my results here in case anyone wants to dispute it, or if someone else finds it useful.
When pivoted 25 degrees... (rounding off to nearest inch)
A 66" wide plow cuts a 60" path.
A 60" wide plow cuts a 54" path.
Any math geeks out there want to confirm or dispute?
I ordered the 66" plow.