P1000 What pressure washer are you guys using?

L2R

L2R

Understanding women Vol. 1
Lifetime Member
Feb 16, 2019
1,063
6,599
113
East of the Appalachians
Ownership

  1. 700-4
I agree with JTW and going electric as gas powered tools wear out.
I have a eat eater that is just as bad ass or better than my old stihl gas eater.

Once I had the 40v battery, I bought a 19 inch mower for around the pool and it mows the heavy grass too. Hard to believe, it feels like a Barbie mower but it works great.

They have limits but the electric tools are better than just 3 or 4 years ago.
 
Mudder

Mudder

NTC Ambassador of Walls
Lifetime Member
Oct 1, 2016
11,660
88,067
113
Georgia
Ownership

  1. Other Brand

  2. 500
For the electric ones, does it have a means to drain for freeze protection in winter months? Been looking at those for a second unit down at the barn. Thanks.
 
  • Like
Reactions: rtn001
Firemedic530

Firemedic530

Well-Known Member
Lifetime Member
Nov 3, 2017
387
1,133
93
West Jefferson, Ohio
Ownership

  1. 1000-5
The easiest way would be the aerosol anti freeze can they sell for them. Make sure you drain the high pressure hose and gun, or hold it open and send the entire can through the system. Easier without the small tip in wand.
 
  • Like
Reactions: rtn001 and Mudder
S

Skjerv40

Active Member
May 14, 2018
103
169
43
Minnesota
Ownership

  1. 1000-5
I use a 3100 psi pressure washer. I bought one of these for 13 bucks off Amazon that allows me to adjust the pressure. It works pretty well. It allows me to turn down the pressure when I’m cleaning inside the wheels, around hoses, the seat, or on decals, but I can still give her hell everywhere else.

3755d54c575926d46169aa593bbbcb73


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: rtn001
Z

zandroid

Member
Jan 12, 2019
28
61
13
USA
Ownership

  1. 1000-3
I have a Mi-T-M with a Chinese Honda clone. My two small engine shops I use say the Chinese clones are good to go now a days.

The pump on pressure washers is the weak point, and generally not the motor. Make sure to look for one with the triplex pump with mostly brass components.

If you don't want to or can't spend the money on the better pump, buy by price and treat it like a disposable product and plan to replace it every 4 or 5 years.

Storage after use, clearing water from the pump, especially during the winter greatly effects longevity.

I think I bought my Mi-T-M on clearance on Amazon for around $300. I think it was about half off.

www.mitm.com
 
  • Like
Reactions: rtn001
rtn001

rtn001

Well-Known Member
May 23, 2018
317
945
93
Central Florida
Ownership

  1. 500
I've got aTroy Bilt 2700 psi, 2.3 gpm with a Briggs And Stratton 175 cc engine. I normally use a lower pressure nozzle unless the mud is really bad. I then use the higher, narrow angle nozzle but am very careful as to where I point it. It's down right now as the unloader has gone bad and Briggs and Stratton wants 90 bucks for a new one. Looking for a aftermarket unloader and I'm not sure what to order. I don't think I would buy another unit this big for the sxs as I have found the water hose does about as good for normal cleaning.
 
Last edited:
  • Like
Reactions: Tundra20
Smitty335

Smitty335

Well-Known Member
Lifetime Member
Supporting Member
Oct 3, 2016
35,445
208,726
113
NWA Arkansas
Ownership

  1. 1000-3

  2. 1000-5
advertisement
S

Skjerv40

Active Member
May 14, 2018
103
169
43
Minnesota
Ownership

  1. 1000-5
No. I thought hard about it, but I already have an electric Ryobi one that works just fine and a nice gas one. My wife has me focusing on not having five of everything....


Sent from my iPhone using Tapatalk

IMG 5601




Sent from my iPhone using Tapatalk
 
  • Like
Reactions: rtn001
B

balderclev

New Member
Apr 13, 2019
3
2
3
Benton Ar
Ownership

  1. 1000-3
I've got a simpson 3200 with a axial cam pump and kohler engine. Great washer and small. I just back up from sensitive areas to reduce pressure. Really want an electric with diesel heater. Talking about cleaning machines!
 
  • Like
Reactions: rtn001
GPR1500SC

GPR1500SC

Well-Known Member
Lifetime Member
Mar 3, 2016
861
2,425
93
North East MO
Ownership

  1. 1000-5

  2. Talon X LV
I got a 5.5 GPM @ 5,000 PSI washer with a twin cylinder Honda on it to wash the barn down between groups this fall it will be ten years old and it starts and work's flawlessly, gallons per minutes is the way to go, with a gas motor you just idle it back to reduce the pressure and still keep the volume to clean with.
I got it from Water Cannon they where easy to deal with and seemed now washer's.
 
  • Like
Reactions: rtn001
D

Dasmoeturhead

Guest
Subaru 3200 psi washer here also. Fine little machine. Sam's Club purchase.
 
  • Like
Reactions: rtn001
advertisement

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!