P1000 What kind of trailer do you use to transport your P1k and what do you pull it with?

[Dezrik]

Nice!! Too bad you don’t have anywhere good to ride around there... lol

Haha we have miles and miles of "scenic" trails that are challenging during the spring thaw. I like crawling so we have to drive to Utah often. I want to try Disney Oklahoma soon!

 

[Admin]

 

[JTW]

Haha we have miles and miles of "scenic" trails that are challenging during the spring thaw. I like crawling so we have to drive to Utah often. I want to try Disney Oklahoma soon!

I was thru pine dale this past summer... I liked the look of it! But glad to hear you say that on the type of trail... I’m with ya on the crawling. Where in Utah do you ride?

 

[Dezrik]

I was thru pine dale this past summer... I liked the look of it! But glad to hear you say that on the type of trail... I’m with ya on the crawling. Where in Utah do you ride?

Mainly Moab but this summer we are going to branch out and try to wheel a lot of the Utah State, sand hallow is on the list.

 

[JTW]

Mainly Moab but this summer we are going to branch out and try to wheel a lot of the Utah State, sand hallow is on the list.

We’re planning on Moab again this fall.. @Kilo427

 

[Dezrik]

We’re planning on Moab again this fall.. @Kilo427

Our first trip to Moab is beginning of april

 

[JTW]

Our first trip to Moab is beginning of april

I love it!

 

[Dezrik]

No More Trailer for me Did a Quick test to see if it would fit, Well it does but barely, Didn't seem safe to me. One of the main drivers of doing this was when we went to Moab or out of town with the Pioneer We'd have to find Parking for the truck and trailer and in Moab Large parking areas are almost non-existant! I built it so I could add a hitch later to pull a small camper once we find the right one!



So I Built a removable Extension, The extension doesn't really hold a lot of weight, most of the weight lands on the very end of the flatbed. Very happy with the results.....now if only I could find ramps that hold up to the pioneer weight but don't weigh as much as my steel ramp!

 

[JTW]

No More Trailer for me Did a Quick test to see if it would fit, Well it does but barely, Didn't seem safe to me. One of the main drivers of doing this was when we went to Moab or out of town with the Pioneer We'd have to find Parking for the truck and trailer and in Moab Large parking areas are almost non-existant! I built it so I could add a hitch later to pull a small camper once we find the right one!

View attachment 113776 View attachment 113777

So I Built a removable Extension, The extension doesn't really hold a lot of weight, most of the weight lands on the very end of the flatbed. Very happy with the results.....now if only I could find ramps that hold up to the pioneer weight but don't weigh as much as my steel ramp!


View attachment 113778
View attachment 113779
View attachment 113780
View attachment 113781
View attachment 113782
View attachment 113783

@Kilo427

 

[hif355]

Pioneer by itself 7x12' PJ Dump

Dump

• hif355
• Apr 17, 2019

With other equipment 30' Gooseneck

Gooseneck

• hif355
• Apr 17, 2019

Tow rig 2018 3500 GMC

Truck

• hif355
• Apr 17, 2019

 

[tincangob]

I did not read every response, but I can tell you that a 7' wide enclosed will not work with a P1000. I tried it with every configuration that the dealer come come up with, and it just won't work. I didn't want to go wider than 7' due to how the trailer would handle with the wind resistance etc. I ended up with an open Aluma 6X12 with hydraulic tilt, and it is a great trailer for the P1000 - albeit a tad expensive. It pulls easily and with my Toyota Highlander, and it's a breeze to load and unload. I had a 2' wind/mud shield installed on the front (an option), and I had them weld another tie down anchor in the front, middle of the trailer. Love it! It's certainly not the only solution, but it is a good one particularly for an easy pull and easy loading.

 

[Dirtstiffs-1000]

Getting closer to dropping the trailer and just piggy backing. We will be way more mobile this way. We trail all day and go to town to hang out.

Hmmm, my wife and I are from Pinedale.
Small world.

Jim


View attachment 104687

 

[Dezrik]

Good ol Pinedale, Lots of pioneers around here , got mine and everyone bought one it seems lol

 

[snuffnwhisky]

 

[Dirtstiffs-1000]

We'll be there this summer, this time we will bring the Pioneer. Bros in laws, outlaws all ride them up there.
I'll look you up.

Jim

 

[Redhonda29]

I just bought a 12ft aluminum flatbed trailer with a 4ft pullout loading ramp and will be pulling it with a Ram 1500 ECO Diesel.

Will be watching. Have been looking to find a enclosed trailer for my 1000-5 Would be nice to hear some advice from experienced
peeps.


Sent from my iPad using Tapatalk

Will be watching. Have been looking to find a enclosed trailer for my 1000-5 Would be nice to hear some advice from experienced
peeps.


Sent from my iPad using Tapatalk

I have a 2019 18’ titan stealth with extra 12” of height( extra 6” door opening to short) I pull with a 2004 Chevrolet 1500 2wd holds pioneer 1000-5 and all our gear with room to spare. perfect trailer one machine and atv but need little more truck the 5.3 pulls it but don’t want anymore

 

[JTW]

I have a 2019 18’ titan stealth with extra 12” of height( extra 6” door opening to short) I pull with a 2004 Chevrolet 1500 2wd holds pioneer 1000-5 and all our gear with room to spare. perfect trailer one machine and atv but need little more truck the 5.3 pulls it but don’t want anymore

You should just sell me that trailer!

 

[Chevy412SP]

No More Trailer for me Did a Quick test to see if it would fit, Well it does but barely, Didn't seem safe to me. One of the main drivers of doing this was when we went to Moab or out of town with the Pioneer We'd have to find Parking for the truck and trailer and in Moab Large parking areas are almost non-existant! I built it so I could add a hitch later to pull a small camper once we find the right one!

View attachment 113776 View attachment 113777

So I Built a removable Extension, The extension doesn't really hold a lot of weight, most of the weight lands on the very end of the flatbed. Very happy with the results.....now if only I could find ramps that hold up to the pioneer weight but don't weigh as much as my steel ramp!


View attachment 113778
View attachment 113779
View attachment 113780
View attachment 113781
View attachment 113782
View attachment 113783

Try a set of 12ft folding arch ramps made out of aluminum by Diamondback truck covers. Can support the weight of the Pioneer, super light and fold up out of the way. I have a Diamondback truck cover on my 12' Chevy 3500 dually and I can drive my atv's up on the cover no problem with them. They also have a 2inch lip on both sides so you can't accidentally drive off the side while loading. Highly recommend them.

 

[Dezrik]

Thanks for the recommendation!

Try a set of 12ft folding arch ramps made out of aluminum by Diamondback truck covers. Can support the weight of the Pioneer, super light and fold up out of the way. I have a Diamondback truck cover on my 12' Chevy 3500 dually and I can drive my atv's up on the cover no problem with them. They also have a 2inch lip on both sides so you can't accidentally drive off the side while loading. Highly recommend them.

 

[Vikes79]

I did not read every response, but I can tell you that a 7' wide enclosed will not work with a P1000. I tried it with every configuration that the dealer come come up with, and it just won't work. I didn't want to go wider than 7' due to how the trailer would handle with the wind resistance etc. I ended up with an open Aluma 6X12 with hydraulic tilt, and it is a great trailer for the P1000 - albeit a tad expensive. It pulls easily and with my Toyota Highlander, and it's a breeze to load and unload. I had a 2' wind/mud shield installed on the front (an option), and I had them weld another tie down anchor in the front, middle of the trailer. Love it! It's certainly not the only solution, but it is a good one particularly for an easy pull and easy loading.

Mine works fine. 7x14 stealth trailer. The rig even has doors on it.

 

[Smitty335]

Mine works fine. 7x14 stealth trailer. The rig even has doors on it.
View attachment 124756

Pictures? Or you did crawl out of the back! HA!