P1000m5 What did you add to/do with your Pioneer 1000 5 today?

[ohanacreek]

Fixed it, can’t even tell I messed up😁View attachment 199005View attachment 199006

might I suggest removing the shackles or putting a bungee between them, I have the same ones and the shackles will drive you mad rattling.
I usually only have one shackle in now, and the winch hook in it with some tension in the line.

 

[Admin]

 

[Ridinfool]

might I suggest removing the shackles or putting a bungee between them, I have the same ones and the shackles will drive you mad rattling.
I usually only have one shackle in now, and the winch hook in it with some tension in the line.

I was going to try some rubber washers on each side of the eye and if that don’t work I’ll remove them or do the bungee thing.

 

[Ridinfool]

Did this today... should make it faster... right? Thanks @Mudwing 😁
tha

 

[Mudwing]

Did this today... should make it faster... right? Thanks @Mudwing 😁
thaView attachment 199589

Oh snap. That’s not for speed. That’s a chick magnet. 😉

 

[Ridinfool]

Oh snap. That’s not for speed. That’s a chick magnet. 😉

Oh hell... I don’t need any more chickens, can’t keep up with the ones I got.

 

[Delton]

Hasn't officially been "added" to mine yet but give me few days to get it painted and weld up roof lip.

 

[Isaiah]

I used mine to tow my rubicon broke a tie rod

 

[SteveinUT]

Took off the Tusk full windshield (tired of eating dust) and changed the sub-trans to 10W-40 Amsoil Metric Motorcycle, and took it for about a 100 mile ride.

 

[rickoshea]

Got my new runva 4500 winch today so that goes in tomorrow.now if my brake pads would get here I could actually go for a rip. They are squealing bad right now.

 

[Isaiah]

Got my new rumba 4500 which today so that goes in tomorrow.now if my brake pads would get here I could actually go for a rip. They are squealing bad right now.

Mine brake are to hopefully going to put my winch on Monday

 

[100Acre]

I got up to 42 mph in the driveway tonight!

 

[Remote]

The COVID made me do it. Found a spare set of tool holders cleaning the shop. Remembered I really wanted a full size shovel when I got stuck in a snow bank a few weeks ago. The wife asked me if I was going to do anything with some old dining fly remnants she was cleaning up in the yard. 1 hour later.......the perfect place to drape some camo netting over and shoot from the shade. Sets up in less than a minute and snaps off as a unit in about 5 seconds if you have to go check distant targets.

 

[BBLASER]

Installed my Modquad/ open trail full skids today and ordered up some 28" Evo's on some new wheels.

 

[LIVINTALL]

I finally installed my stereo today

 

[Remote]

Stowage is stupid simple. Pull support legs, drop frame down and ratchet strap the bottom. Took a couple laps around the meadow to see how secure it was and it could stay on all the time if it needed to. Breaking quarantine to visit town tomorrow to pick up some shooting goodies and some camo net sun cover the brown truck dropped off at the office. Killing prairie dogs in the shade......life is good!

 

[Adam490]

Installed my Modquad/ open trail full skids today and ordered up some 28" Evo's on some new wheels.

How did the skid go on? I've got the same one and have no complaints

 

[BBLASER]

How did the skid go on? I've got the same one and have no complaints

It went on fairly smooth except for the front 4 bolts. I feel the ones they supply are slightly too short. I had to use an adjustable clamp to compress the skid tight enough to the frame for the bolt to be long enough. The front 4 holes were also lightly off, so I had to elongate 2 holes to get the bolt to go in straight. Overall, it was a pretty simple straight forward install. I may drill some more holes in it and may add a few more attachment points in the future. I am going to go with how it came stock for a little and see if I need to do any more work.

 

[Bad_bowtie]

Finally had to change my factory brake pads at around 1500 miles after this past weeks trip to Royal Blue. Rears were completely gone and fronts weren't far behind them. Also changed my halogen headlight bulbs to some beam tech led bulbs. Definitely an improvement.

 

[nitzo]

Also changed my halogen headlight bulbs to some beam tech led bulbs. Definitely an improvement.

Which ones worked in the Pioneer? Do they fit right in? Thanks

 

[Bad_bowtie]

Which ones worked in the Pioneer? Do they fit right in? Thanks

BEAMTECH H13 9008 LED Headlight Bulb CSP Kit 8000LM 50W 6500K Dual High Low Beam | eBay

Find many great new & used options and get the best deals for BEAMTECH H13 9008 LED Headlight Bulb CSP Kit 8000LM 50W 6500K Dual High Low Beam at the best online prices at eBay! Free shipping for many products!

www.ebay.com