P1000m5 What did you add to/do with your Pioneer 1000 5 today?

[JMynes]

Nice setup. Speedy.

But it could be faster if he used red straps.

 

[Admin]

 

[Jankyeye]

Mounted some L track to the tusk roof for decoy/blind carrying. Should be the easiest goose season yet.

 

[brettc]

Finally mounted my wheel chauks on my trailer

That's how I haul mine.. regular 2200 mile round trips to our Colorado cabin. Check and re-tighten them one or twice at gasoline fillups and it doesn't move at all. They're great.

 

[wolf359]

Bumped around Preston County WV with some friends for a few hours on Sunday!

 

[NTCPrezJB]

But it could be faster if he used red straps.

Ed Zachery! 🤣😂

 

[NTCPrezJB]

Bumped around Preston County WV with some friends for a few hours on Sunday!

View attachment 344367

Drop this pic in the current ROTM contest.
Link…

ROTM - July - POIDH!

We are keeping the Ride of the Month rolling here. If you happen to have a cool universal (not machine specific) prize idea or a cool theme idea you’d like to see feel free to PM me or just drop your idea in the current ROTM thread. Standard Ride of the Month Rules will apply. POST 1 (ONE)...

hondasxs.com

 

[wolf359]

Drop this pic in the current ROTM contest.
Link…

ROTM - July - POIDH!

We are keeping the Ride of the Month rolling here. If you happen to have a cool universal (not machine specific) prize idea or a cool theme idea you’d like to see feel free to PM me or just drop your idea in the current ROTM thread. Standard Ride of the Month Rules will apply. POST 1 (ONE)...

hondasxs.com

Done. Thanks for the tip!

 

[NTCPrezJB]

Done. Thanks for the tip!

No worries sir. We love Honda pics!

 

[gullyjumper]

You know he is wright about the stripes, I added a black stip to my hood and gained 10 mph !

 

[Glank]

Well, I finally did it. Got it stuck. Bad driver decision. I was almost out of the swamp and the trial had one last big rut. Why I didn’t straddle it like to previous 20 ruts, I will never know. Buried the A arms and high centered the front end so the front wheel were off the ground. Luckily the SuperATV winch did its job. And the next person can thank me for filling in the rut.

 

[Dirtstiffs-1000]

Well dang it... I wish I had done this before..
My 2018 LE has never, ever overheated above 2 bars until today. We were out in W Oregon in the timber, 4 passengers, just putting along and my wheeler briefly overheated. Once the fan came on, back to 2 bars.
I ordered Richard's fan override kit and some purple ice when we got home.
Thanks Richard.

 

[mlynch001]

These intercept part of the air that is passing over the top of the windshield when it is tilted out. We found this little trick accidentally when we were putting our hands up to feel how much air was being moved by the tilt windshield. Your hand would deflect the air down into your face. So I Designed and 3D printed a set of roll bar mounted Air Deflectors to mimic our hands into the air stream along the roof. Before these were added, the air that passed over the top of the windshield simply followed along the roof and dumped out the sides or back. This device "scoops" some of that air and directs it to the driver or passenger into the upper body or face area.. Makes a considerable difference in comfort.

 

[jenk61]

These intercept part of the air that is passing over the top of the windshield when it is tilted out. We found this little trick accidentally when we were putting our hands up to feel how much air was being moved by the tilt windshield. Your hand would deflect the air down into your face. So I Designed and 3D printed a set of roll bar mounted Air Deflectors to mimic our hands into the air stream along the roof. Before these were added, the air that passed over the top of the windshield simply followed along the roof and dumped out the sides or back. This device "scoops" some of that air and directs it to the driver or passenger into the upper body or face area.. Makes a considerable difference in comfort.


View attachment 345609View attachment 345610View attachment 345611

Neat idea, I was looking at printing something similar for a sun visor. You've got the wheels turning. Did you also print the flat part? My printer will only go about 8 1/2 inches square.

 

[mlynch001]

Neat idea, I was looking at printing something similar for a sun visor. You've got the wheels turning. Did you also print the flat part? My printer will only go about 8 1/2 inches square.

I printed all of the parts on an Ender 3 235 x 235 mm bed. Printed in PETG. I was restricted in size by my rear view mirror, but these still work great, in spite of being only about 6" (more or less) square.

 

[jenk61]

I printed all of the parts on an Ender 3 235 x 235 mm bed. Printed in PETG. I was restricted in size by my rear view mirror, but these still work great, in spite of being only about 6" (more or less) square.

Thanks, I have an Ender 3 pro. Did you design or use existing files?

 

[mlynch001]

Thanks, I have an Ender 3 pro. Did you design or use existing files?

I designed the 3D printed pieces myself. Hardware is just standard stuff from the hardware store.

 

[Dirtstiffs-1000]

Well dang it... I wish I had done this before..
My 2018 LE has never, ever overheated above 2 bars until today. We were out in W Oregon in the timber, 4 passengers, just putting along and my wheeler briefly overheated. Once the fan came on, back to 2 bars.
I ordered Richard's fan override kit and some purple ice when we got home.
Thanks Richard.

Got the Fan override kit, thanks Richard!
Got all but the switch mounted in place. Works as it should.

For you LE guys, there is another wire connection near the fan connection that looks kinda like where you tie in the override harness... it's from the I4wd valve assembly.
Took a few more minutes in the 100 degree heat to figure that out..
Added 3 ounces of purple ice, just for...

 

[Robobrainiac]

I weighed the machine on a scale today and it weighed 2420lbs! That was with me in it and almost a full fuel tank.

 

[Dirtstiffs-1000]

I weighed the machine on a scale today and it weighed 2420lbs!

Subtract your weight off if you drove on a scale and didn't get off.
That's why I added 350# springs to the rear Fox shocks.

 

[Robobrainiac]

Subtract your weight off if you drove on a scale and didn't get off.
That's why I added 350# springs to the rear Fox shocks.

I weigh about 220.

My wife and I with our cooler, and tool bag/box, with some additional stuffs should put the total weight around 2700.

I just invested in the 250lb front and 300lb rear. Do you think I need to go heavier?