P1000 transmission

[Neohio]

O ok right on, I gotta figure out if this machine had that update hopefully tommrow after work, between work an kids football practice freaking busy

It is a quick visual inspection. Post #9 in this thread shows what you are looking for.

 

[Admin]

 

[0860silverado]

T


To fix or take off my hands, just kidding I really wanted one, figured try to save few bucks an grab one with an issue, so just to figure it out an hopefully have no more than 1-2k more into it

After you get it repaired, you're gonna love it! My 2016 has over 22,000 miles on the original clutches. I've never had the updated clutch cover installed. The original cover and clutch wasn't necessarily a bad design, it's just that in rare cases of operator error, (slipping the clutch instead of winching out of a deep mud hole), the clutches weren't getting enough oil causing them to overheat quickly. With the new cover, this issue is almost unheard of. Don't fret! Once you get it repaired, you'll have a barely broken in P1K for less than $9,000!!! Hope this cheers you up bud!

 

[s_hammond]

After you get it repaired, you're gonna love it! My 2016 has over 22,000 miles on the original clutches. I've never had the updated clutch cover installed. The original cover and clutch wasn't necessarily a bad design, it's just that in rare cases of operator error, (slipping the clutch instead of winching out of a deep mud hole), the clutches weren't getting enough oil causing them to overheat quickly. With the new cover, this issue is almost unheard of. Don't fret! Once you get it repaired, you'll have a barely broken in P1K for less than $9,000!!! Hope this cheers you up bud!

I greatly appreciate the positivity, an yes I'm hoping to definitely Stay 9k an less already have 400 in new shift motor an angle sensor, but i plan to do all the work myself, on whatever the issue may be

 

[Remington]

hopefully have no more than 1-2k more into it

Even with 4K in it, you’re still way ahead than most. So I wouldn’t sweat it.

 

[DRZRon1]

If it goes into 1st gear and no movement - the one item is the clutches need to be checked

hi - so if you manually shift it into second- you can drive it down the road and all is good?

if you are in 1st or 3rd - does it just rev up?

or if you manually shift it and lift it up - the wheels turn very slowly - in what gear?

as posted above - there are 2 clutch packs in the beast - generally 1/3/5/R goes first if it is the clutch pack

I cant keep up and am very binary, its either yes or no - lol

I did not, had a busy evening after work, What exactly is the issue with the "clutch cover"?

the updated clutch cover put more cooled oil into the clutch area to cool it down to Prevent overheating and smoking the clutch packs

If wheels are turning , sub transmission is probably all right - just a clutch pack is bad - probably need to go inside to inspect

 

[JACKAL]

Here is the most likely solution to the problem you describe.

P1000 - Honda Pioneer 1000 Clutch Replacement - A How To Guide!

Lets talk CLUTCH REPLACEMENT! The 2016 Honda Pioneer 1000 seems to be getting a reputation for having clutch failures and it has been common perception that Honda was taking care of these issues as they come up for all its loyal riders. WRONG! Lets say if you are stock and haven't drove through...

hondasxs.com

 

[s_hammond]

the updated clutch cover put more cooled oil into the clutch area to cool it down to Prevent overheating and smoking the clutch packs

If wheels are turning , sub transmission is probably all right - just a clutch pack is bad - probably need to go inside to ins

Here is the most likely solution to the problem you describe.

P1000 - Honda Pioneer 1000 Clutch Replacement - A How To Guide!

Lets talk CLUTCH REPLACEMENT! The 2016 Honda Pioneer 1000 seems to be getting a reputation for having clutch failures and it has been common perception that Honda was taking care of these issues as they come up for all its loyal riders. WRONG! Lets say if you are stock and haven't drove through...

hondasxs.com

 

[s_hammond]

.

 

[s_hammond]

.

View attachment 440934

So there is no bump saying it has the updated clutch cover

 

[JACKAL]

So there is no bump saying it has the updated clutch cover

Your best option is to then buy the updated cover and both clutch packs, the new cover provides much more oil to keep the clutches from overheating. It can be tricky on reassembly on ensuring no O rings get pinched or out of place, this comes from multiple people who have experienced that having issues after reassembly.

Good luck getting it up and running properly.

 

[s_hammond]

Your best option is to then buy the updated cover and both clutch packs, the new cover provides much more oil to keep the clutches from overheating. It can be tricky on reassembly on ensuring no O rings get pinched or out of place, this comes from multiple people who have experienced that having issues after reassembly.

Good luck getting it up and running properly.

Does Anyone happen to know part numbers for the correct clutches? I have read alot about people doing a talon reverse gear on there's as well, do yall think this is nessary for farm riding an occasional poker runs?

 

[DRZRon1]

Just look up part numbers for your machine on partzilla, Ron Ayer’s, etc…… Ayer’s usually smokes everyone on prices on Honda oem stuff


For farm riding - just the updated clutch cover and stock clutch packs and u will be more than fine - even poker runs are a non issue - don’t overthink this - u bought a cheap machine with a known issue - some time and money and that will be as good as a new machine


Just don’t do anything dumb like try to pulll immovable objects, if in deep mud, winch out - after all, the beast just has a fibre clutch pack and a clutch is a clutch - power in - no movement out - fried

 

[s_hammond]

Just look up part numbers for your machine on partzilla, Ron Ayer’s, etc…… Ayer’s usually smokes everyone on prices on Honda oem stuff


For farm riding - just the updated clutch cover and stock clutch packs and u will be more than fine - even poker runs are a non issue - don’t overthink this - u bought a cheap machine with a known issue - some time and money and that will be as good as a new machine


Just don’t do anything dumb like try to pulll immovable objects, if in deep mud, winch out - after all, the beast just has a fibre clutch pack and a clutch is a clutch - power in - no movement out - fried

Thank you for the respomce ill.look into

 

[Neohio]

Talon parts are for the subtrans. You won't be in that doing clutch cover.

 

[s_hammond]

Hey all back again, found the clutches an other stuff needed to do this job, i want to also do the updated clutch cover does anyone know the part number? dont want to buy one that i already have, thanks in advance.

 

[Neohio]

Hey all back again, found the clutches an other stuff needed to do this job, i want to also do the updated clutch cover does anyone know the part number? dont want to buy one that i already have, thanks in advance.

P1000 - Product Update - Official Pioneer 1000 Clutch Update! Expires 9/2020

ITS OFFICIAL. Honda has finally released the UPDATE CAMPAIGN set to fix all the issues many of us have been having with the clutches. Who is eligible for this update? ALL 2016 Pioneer 1000's are eligible. ALL 2017 Pioneer 1000's are eligible. 2018's are expected to come with this...

hondasxs.com

 

[Neohio]

P1000 - Product Update - Official Pioneer 1000 Clutch Update! Expires 9/2020

ITS OFFICIAL. Honda has finally released the UPDATE CAMPAIGN set to fix all the issues many of us have been having with the clutches. Who is eligible for this update? ALL 2016 Pioneer 1000's are eligible. ALL 2017 Pioneer 1000's are eligible. 2018's are expected to come with this...

hondasxs.com

Take these part numbers and look on ebay. Looks like many options currently.

 

[Hello_Darkness]

Hey all back again, found the clutches an other stuff needed to do this job, i want to also do the updated clutch cover does anyone know the part number? dont want to buy one that i already have, thanks in advance.

The old part isn't available anymore.

 

[s_hammond]

Hey yall just, checking in letting everyone know that tried to help me out, I replaced the clutches an same issue as before, will not allow a relearn an can manually still put shift motor into 3rd gear an run it flawlessly thay way, maybe one of the eop sensors? Still.lookong for answers thanks

 

[Remington]

Hey yall just, checking in letting everyone know that tried to help me out, I replaced the clutches an same issue as before, will not allow a relearn an can manually still put shift motor into 3rd gear an run it flawlessly thay way, maybe one of the eop sensors? Still.lookong for answers thanks

New ECU