P1000 Transmission issues

[Hoode_68]

I'm having a transmission problem when I started up on the display on the dash it shows a (_) but it is in park I put it in reverse it still shows a (_) I put it in neutral The dash shows reverse I put it in h it shows it's in neutral I put it in Low it says it's in high The transmission is in the right gears but the display is not reading properly there has to be an electronic sensor in the transmission that tells it what gear it is in for the display

 

[Admin]

 

[CumminsPusher]

You'll need to reset the transmission. Here's the guide courtesy of @JACKAL
P1000 - Reset the DCT Clutch / Clutch Initialize Learning Procedure
Follow it absolutely all the way through in a very timely manner and you'll have good results. Pretty sure this'll do the trick for you.


Sent from my iPhone using Tapatalk

 

[Hoode_68]

You'll need to reset the transmission. Here's the guide courtesy of @JACKAL
P1000 - Reset the DCT Clutch / Clutch Initialize Learning Procedure
Follow it absolutely all the way through in a very timely manner and you'll have good results. Pretty sure this'll do the trick for you.


Sent from my iPhone using Tapatalk

But on the dash it don't go to P for park or L for Low The transmission itself will shift there but it will not display low

 

[CumminsPusher]

Yes I know what you're saying. The computer needs to relearn. Try this procedure but again do it in a timely manner it might take two or three times to get it right but do this first.


Sent from my iPhone using Tapatalk

 

[Hoode_68]

Yes I know what you're saying. The computer needs to relearn. Try this procedure but again do it in a timely manner it might take two or three times to get it right but do this first.


Sent from my iPhone using Tapatalk

OK I'll try here in a little bit and let you know how it turns out thank you very much for the help

 

[Hoode_68]

OK I'll try here in a little bit and let you know how it turns out thank you very much for the help

 

[AKRider]

What CP said. You need to perform the steps very quickly. It took me about 6 times to get it right when I did it.