Tram's Ranch Limo build

[Tramguage1]

I have been kind of looking for one of these since i went with @Hondasxs to Montana for the unveiling of this machine.
Picked up this 23 1000-6 a few weeks ago. I needed to reduce the number of Hondas i had ! So I traded the 2 seat Talon X and sold the 17 P1k LE to my son who needed a sxs. So, I found this at a good price and jumped on it.
It had 650 miles on it and a few add-ons.

Full Honda one piece windsheld
52" curved light bar
Boss sound bar
Rear veiw and some side mirrors
Soft rear panel

Today I did a couple things that I feel are must dos to the Pioneers.

RB3 door bushings
SATV flip up windsheld
Winch mount ( reusing the rear mounted winch from my LE.)
This is going to be a work machine, so I will likly add some rear and side work lights, a dual battery (or full size battery conversion) and a couple 12 vdc waterproof plugs for sprayer and power at the rear seats.

 

[Admin]

 

[Scrappapotamus]

Nice

 

[Neohio]

Looks good Tram.

 

[Tramguage1]

 

[Scoop]

^ Much improved.

 

[TimG]

I have been kind of looking for one of these since i went with @Hondasxs to Montana for the unveiling of this machine.
Picked up this 23 1000-6 a few weeks ago. I needed to reduce the number of Hondas i had ! So I traded the 2 seat Talon X and sold the 17 P1k LE to my son who needed a sxs. So, I found this at a good price and jumped on it.
It had 650 miles on it and a few add-ons.

Full Honda one piece windsheld
52" curved light bar
Boss sound bar
Rear veiw and some side mirrors
Soft rear panel
View attachment 439672
Today I did a couple things that I feel are must dos to the Pioneers.

RB3 door bushings
SATV flip up windsheld
Winch mount ( reusing the rear mounted winch from my LE.)
This is going to be a work machine, so I will likly add some rear and side work lights, a dual battery (or full size battery conversion) and a couple 12 vdc waterproof plugs for sprayer and power at the rear seats.

Very nice ! I want one !

 

[ODAMO]

Pooch is like: Previous owner had two dogs, Nice…

 

[Tramguage1]

Pooch is like: Previous owner had two dogs, Nice…

She doesn't let us ride much without her in the seat!

 

[Tramguage1]

Well today I started a couple of mods on the Ranch Limo.

Installing a set of Atlas( SATV) forward A arms so I can run 30"s.

Installing a SATV full skid plate.

Here's a few shots of the swap.
I will do an in dept thread on the installation.

 

[Tramguage1]

Pooch is like: Previous owner had two dogs, Nice…

She loves riding in the sxs and the truck!

 

[ODAMO]

Well she certainly does look comfortable. My dogs would not sit still for a ride. They would think we were going to the vet and book

 

[Tramguage1]

Finished up the Ranch Limo's SATV skid plate install last night. I think it turned out pretty darn good.

As you can see it's fits really well and smooth on the bottom.
The normal install you would use approximately 20 tek screws for the spots that are not factory points.

I chose to drill and tap all of these screw holes. I will check the fasteners after my first test ride. If they do not hold i can go back and install rivnuts and re anchor. I also reused a few of the OEM bolts in the places they would work and have a full bolt thread through the factory nut.

Overall the install was straight forward and not to difficult when you have access to a care lift.

 

[Tramguage1]

Next mod complete!
Added OEM LED headlights to the Limo.
It's awesome when you have a buddy that updated his Talon headlights and swapped you for his OEM.headlights. This may be the only crew with OEM led headlights.