![ToddACimer](/data/avatars/m/5/5905.jpg?1483301310)
Big trip planned for next weekend to Drummond Island Michigan. I installed my BCF harness bar and Can-am harness.
This man’s got good taste in harnesses!Big trip planned for next weekend to Drummond Island Michigan. I installed my BCF harness bar and Can-am harness.
View attachment 142785
View attachment 142786
View attachment 142784
One of those things Honda should just do and add a few hundred bucks.This man’s got good taste in harnesses!
There are several of those things! Many of which wouldn’t have cost Honda a few dimes extra! Stainless brake lines, storage, arched a arms, lower low gearing, a real skid plate, decent tires, vent lines up high and an actual cage.One of those things Honda should just do and add a few hundred bucks.
I still have my nets, your welcome to them.With that being said the check book took a hit this morning. I have 2 sets of CV boots on the way, 2 new tie rods, 4 Honda ball joints and a set of SuperATV front arms.
I'm looking for a set of nets for a 1000-5. I need a right front for sure.
I was hoping to carry the left front into the left rut off the bank but we kinda flopped in there. I drove it til the tip sensor shut us off and then we winched about 10 ft.Awesome! Love good carnage pictures. Did you try to straddle that rut?
I still have my nets, your welcome to them.
Well the last 200 miles were a blast. Spent the weekend on Drummond Island Mi. Lots of rocks, deep water, mud and quite a bit of off trail private property exploration. It comes at a price though.
I lost 3 wheel center caps, tore 2 CV boots, bent a tie rod, bent 2 a-arms, broke a net buckle. We wrecked a steering rack on an Arctic Cat wild cat and tore 2 a-arms off a RZR1000 too. Whoops
Couple photos from the weekend.
RZR carnage, we pulled the a-arm, hammered on it a bit and re-welded it but it still looked terrible
View attachment 144650
Pioneer carnageView attachment 144651
Quick tie rod repair
View attachment 144652
View attachment 144653
Little bit off camber here
View attachment 144654
View attachment 144655
View attachment 144656
View attachment 144657
View attachment 144658
You work a lot harder at having fun than I do. I like your setup.
With that being said the check book took a hit this morning. I have 2 sets of CV boots on the way, 2 new tie rods, 4 Honda ball joints and a set of SuperATV front arms.
I'm looking for a set of nets for a 1000-5. I need a right front for sure.
Are you still needing the nets? I have a set that I’ve been thinking of selling. Took them off first thing before ever riding it.
Jesus H Christ! How hard were you driving there? I’ve rode there quite a few times in my day and never beat chit up quite like thatWell the last 200 miles were a blast. Spent the weekend on Drummond Island Mi. Lots of rocks, deep water, mud and quite a bit of off trail private property exploration. It comes at a price though.
I lost 3 wheel center caps, tore 2 CV boots, bent a tie rod, bent 2 a-arms, broke a net buckle. We wrecked a steering rack on an Arctic Cat wild cat and tore 2 a-arms off a RZR1000 too. Whoops
Couple photos from the weekend.
RZR carnage, we pulled the a-arm, hammered on it a bit and re-welded it but it still looked terrible
View attachment 144650
Pioneer carnageView attachment 144651
Quick tie rod repair
View attachment 144652
View attachment 144653
Little bit off camber here
View attachment 144654
View attachment 144655
View attachment 144656
View attachment 144657
View attachment 144658
Jesus H Christ! How hard were you driving there? I’ve rode there quite a few times in my day and never beat chit up quite like thatIt can be challenging, swampy and rocky, not like RRB but similar in spots but not to the point for that kind of carnage unless your all balls out crazy or not paying attention! Glad you had a good time on my home turf tho. DI is one of the best places to ride in our state.
In the swamp trails there’s hidden obstacles, boulders and ruts for sure. The water is so black u couldn’t see them if u were snorkeling. Not for the faint of heart that’s for sure.Most of our damage was on 2500 acres of private property. Gravel pits, big rocks and tall grass with hidden obstacles
Incase anyone is looking to do this mod, here are the parts needed. I used a 3.25" hole saw.
2 90 degrees 3" elbows, 1 15" 3" pipe cut to 12.5" and 1 5" long 3" pipe. 3" intake inlet.
Break down of the parter and a link to order
2 of these
Hiwowsport 4-Ply High Performance 90 Degree Elbow Coupler Silicone Hose for Auto with T-clamps (3.0"(76mm)) https://www.amazon.com/dp/B074V6HJ7S/?tag=sxsweb24-20
1 of these
3.15" Diameter 3" Length Aluminum Straight Pipe https://www.amazon.com/dp/B07MYK2195/?tag=sxsweb24-20
1 of these
Universal Black Snorkel Inlet Head 3"Inch Fit Off Road Mudding Air Intake Ram US | eBay
I used a section of 3" exhaust pipe to go through the hood. You will need 1 additional 3" clamp, 5 total