P1000 Sub transmission drum position sensor

[Nolawlikevenlaw]

Hey, first time ever posting. Apparently in Canada maybe North America there are no shift drum position sensors. Mine is reading the incorrect gear it’s one off. It’s not a huge deal for now but when the bike is in high the ecu is reading it’s in neutral the clutches don’t engage. Is there a way to get the machine to relearn the positioning on this sensor? I made a small tab to turn my sensor and give it maybe an 1/8 of a turn and bang it reads the correct gear now in the correct position Any experience with this would be a big help

 

[Admin]

 

[P1K5Dave]

Did you have your sub trans apart before this problem? Wondering if it could have anything to do with the service manual error that is known to exist on reassembly.

 

[Remington]

Hey, first time ever posting. Apparently in Canada maybe North America there are no shift drum position sensors.

Congrats! Took a whole 8 months! 😂 easy now Just messin with u lol.
As for your sensor problem, you can thank the Scamdemic for that.

Since you been on here that long you should know this (shame on you!🤣) so I wont go into the reasons.
Pics Or It Didnt Happen!

 

[Nolawlikevenlaw]

I’m thinking about it more now. I think I messed up the shift lever position to the shift drum gear. I had the entire case split but didn’t find anything wrong. The only thing I did gain was a whole pile of extra adjustment room on the shift cable by complete fluke

 

[Nolawlikevenlaw]

I’m at nearly 9000 miles and assumed that low range tore up again. But thankfully not the case

 

[P1K5Dave]

Posts #18 and 19 in my subtrans service thread point to what I was thinking about.

Post in thread 'Sub-Transmission Service' P1000 - Sub-Transmission Service

 

[P1K5Dave]

Posts 58-60 show the different service manuals regarding the shift position on reassembly. The correct version is that your subtrans is in NEUTRAL upon reassembly.
Post in thread 'Sub-Transmission Service' P1000 - Sub-Transmission Service

 

[Nolawlikevenlaw]

Have any of you done the full talon reverse and low range swaps?

 

[P1K5Dave]

<sigh>

 

[Plowboy1466]

<sigh>

I agree. Read this👆👆👆 And there's some more new updated parts. Do a search for them.