Jason W
The Ginger Cracker
Lifetime Member
Supporting Member
We will weld the back on all we can. Thanks a ton for the wisdom!
Oh, and got a set of frame caps from the club store too
Oh, and got a set of frame caps from the club store too
Don't get your hopes up. Highly recommend adding on supplemental lighting if you want to actually see anything at night.Oh, led headlight bulbs here
Well got to give Futzin some due here. Most P5 owners dont send it like he does
Yes, for me it was dust as I ride mainly out in the desert of west TX. Here's a good link of some of us that have done a snorkel.I have nonplans on bogging this machine, so why the snorkel, dust?
Mud busters seem a good idea, just front or both?
^^^^True Story!!!! ^^^^
In most cases reinforcing the front end isn't necessary, @futzin just hit something just right to bend his. In this case it was just the upper rear that got tweaked. Once I got it straight I added the gussets so it wouldn't bend again in the same spot.
Tires are here, almost got stuck rolling em into garage. What shallow tread, lmfao
SaweeeetView attachment 422337[ATTACH type="full"
Don't get your hopes up. Highly recommend adding on supplemental lighting if you want to actually see anything at night.
I thought the same, deep in behind wheel face 5+2 , 1 inch spacers allready onFrom here, those wheels look like 6+1 offset...?
Best place for lighting up a field, up top. Best place for lighting the trail, down low.Best place, where limbs want rip it off, bar up top, bar above winch ?
Can confirm, if you put them up top, they won't be there long.Best place, where limbs want rip it off, bar up top, bar above winch ?
I didn’t know that. Thank you.P5s don't have high beams, only low beam or no beam.