P1000 I bought a new trailer.

[AZhunter]

16' tandum axle with reinforced ramp built into the gate and cable assist. (Because it's heavy) lol

Fits my P1k5, and my MF135 tractor.

It's a 2016.
Bought from a guy who digs graves for a living. He bought a bigger trailer for his backhoe. He also needed trailer brakes. (This trailer has none)
Lucky for me, he had done all the welding to this trailer before he opt'd for a new one.

View attachment 36642 View attachment 36643 View attachment 36644 View attachment 36645 View attachment 36646

thank you very much!

 

[Admin]

 

[GlockMeister]

16' tandum axle with reinforced ramp built into the gate and cable assist. (Because it's heavy) lol

Fits my P1k5, and my MF135 tractor.

It's a 2016.
Bought from a guy who digs graves for a living. He bought a bigger trailer for his backhoe. He also needed trailer brakes. (This trailer has none)
Lucky for me, he had done all the welding to this trailer before he opt'd for a new one.

View attachment 36642 View attachment 36643 View attachment 36644 View attachment 36645 View attachment 36646

Nice looking trailer @Jshell3 ! I sold my 16 footer tonight so guess this weekend I'm going trailer shopping.

 

[Jshell3]

thank you very much!

Here's a little more about the lift assist.

Gorilla Lift (Amazon)

I didn't know anything about the Gorilla lift system when I bought the trailer, but I'm happy it's there. My gate is HEAVY.

This guy built a nice gate. And does a good job of showing it!

 

[Jshell3]

Nice looking trailer @Jshell3 ! I sold my 16 footer tonight so guess this weekend I'm going trailer shopping.

Prepping for the Takeover?

FUN!!!

 

[JTW]

Nice looking trailer @Jshell3 ! I sold my 16 footer tonight so guess this weekend I'm going trailer shopping.

What'cha look'n for?

 

[AZhunter]

Here's a little more about the lift assist.

Gorilla Lift (Amazon)

I didn't know anything about the Gorilla lift system when I bought the trailer, but I'm happy it's there. My gate is HEAVY.

This guy built a nice gate. And does a good job of showing it!

Thanks, nice system,. I need to do something with my tail gate this is a clean and simple system.

 

[Tigermark]

I have an 18ft, just enough room for both machines. it's rated for 7k lbs, and does have brakes.

 

[GlockMeister]

What'cha look'n for?

Probably 6.5x12 or 14 with a dovetail

 

[JTW]

Anybody know the shortest length you can get two 1000's on?

 

[Ridem32]

Anybody know the shortest length you can get two 1000's on?

Depends on if it's 3 seater or 5 seater or one of each


Sent from my iPhone using Tapatalk

 

[sharp]

Anybody know the shortest length you can get two 1000's on?

20ft.

 

[JTW]

Depends on if it's 3 seater or 5 seater or one of each


Sent from my iPhone using Tapatalk

Huh?? Aren't they the same size? Two 5's.

 

[JTW]

20ft.

Kinda what I figured.. we've got an 18ft steel dovetail and probably going to go 20ft aluminum to haul both machines.

 

[wyodlr]

20 foot stock they are 9' 9" each

 

[joeymt33]

Remember that if you have the tail gate down or a rear rack for fuel cans and stuff, you'll be over 10'

I can't fit in my 10' trailer unless I back it on so the spare tire hangs over the front.

 

[ToddACimer]

Somebody recently posted a photo of 2 1000s on an 18' trailer being towed by a red Toyota. I think it would fit as you have at least 8-10" of overhang on either end from axle center. A 20 would give you some extra space though. I bought my 18 with the plan of hauling an RZR 800 and my 1000-5

 

[my99svt]

Here's a little more about the lift assist.

Gorilla Lift (Amazon)

I didn't know anything about the Gorilla lift system when I bought the trailer, but I'm happy it's there. My gate is HEAVY.

This guy built a nice gate. And does a good job of showing it!

I also have the gorilla lift system on my trailer. I can lower and lift the gate with one finger. It will also stop half way down and just sit there. It's perfectly balanced.


Sent from my iPhone using Tapatalk

 

[Jshell3]

I also have the gorilla lift system on my trailer. I can lower and lift the gate with one finger. It will also stop half way down and just sit there. It's perfectly balanced.


Sent from my iPhone using Tapatalk

I could use a little more lift. How do I adjust? I googled, but no video instructions.

 

[Ridem32]

Just stick your finger in the hole and rotate lol


Sent from my iPhone using Tapatalk

 

[my99svt]

You need to move the bolts on your ramp. When the ramp is up, remove the cables from it and relocate the bolts further up on the ramp.