Multi For Sale: Noise/Dust/Heat Shield

[JenElio]

@trigger any plans for the p1000-6 crew?

Sent from my SM-S908U using Tapatalk

Yeah I need a guinea pig. I took a look at one somewhere and it might fit the front and middle section already.

I'd be willing to say it should fit both front and rear bench seat. From all the pictures I've seen they look identical........same seats/part # so why shouldn't it...... But I'm no expert

 

[Admin]

 

[nitrotmann]

@JenElio I did measure the back of the cage in front of the dump bed of both the P5 and the P6 and I know the cage seem to be the same width. however the box of the P6 dump bed was both wider and longer than the P5 was. As an example I bought the P5 Kimmy Moto rear window panel and it should fit just fine according to my measurements. So maybe a single kit from @trigger would work out for that rear.

Sent from my SM-S908U using Tapatalk

 

[Remington]

@JenElio I did measure the back of the cage in front of the dump bed of both the P5 and the P6 and I know the cage seem to be the same width. however the box of the P6 dump bed was both wider and longer than the P5 was. As an example I bought the P5 Kimmy Moto rear window panel and it should fit just fine according to my measurements. So maybe a single kit from @trigger would work out for that rear.

You mean a P1K5 not a P5 right?
There is nothing close that a P5 has that fits a P1K5 or a P6

 

[trigger]

@trigger I'd offer mine, but unfortunately, I don't imagine you are very close to Nampa, ID.

Dei hads no plans for the p1000-6 crew yet, so I've got a couple rolls of foiled fiberglass cloth waiting for me at home. I've got to seal everything yours should block. Looks like a good product.


Sent from my SM-S908U using Tapatalk

I never like to talk bad about a rival's product but what DEI makes is totally different than the shield. There's a bunch of different pieces and parts and you have to take a lot of the machine apart to install them. Have read reviews that there's no clear directions on how to install all those pieces either. But who knows, those could be from the mechanically challenged.

 

[trigger]

@trigger I'd offer mine, but unfortunately, I don't imagine you are very close to Nampa, ID.

Dei hads no plans for the p1000-6 crew yet, so I've got a couple rolls of foiled fiberglass cloth waiting for me at home. I've got to seal everything yours should block. Looks like a good product.


Sent from my SM-S908U using Tapatalk

You could buy one for the front, that you know will work. Try it on the middle section seating and see if it fits?

 

[JenElio]

You could buy one for the front, that you know will work. Try it on the middle section seating and see if it fits?

I don't think the P1K6 needs one for the front, just the rear as that's where the engine is now.....I could be wrong though, the front seat might still get some kinda heat from radiator lines running back n forth??

 

[Scoop]

@trigger - My next door neighbor and best friend has a new 1000-6. If you are interested in making the ~89 mile drive from Bay City down to Howell, I'm sure we could get you some quality time with it. Or if you want me/us to measure something (or send me a shield and we'll try it on there), DM me and we can set something up.

 

[Backwoods]

Sounds like I’m your pig. Although I’m a Yorkshire not a Guinea. Here’s a pic of me on a ride

Of course you’d volunteer

 

[nitrotmann]

Measurements I had taken were on the p1k5, and p1k6.

 

[Bigfoot0320]

I pointed out somewhere in the OG thread that I found two little pockets of water resting on the P5 shield after the first pressure wash I did. Took an awl and poked two little holes in it, never held water again.

ty

 

[lowranger]

I'm going to order one for my 2020 Talon X tomorrow. Have a hot ride coming up at the end of August and want to have time to put it in.
Not sure how long it takes to get to Northern California.

 

[Remington]

Not sure how long it takes to get to Northern California.

Well…. Newsom hasnt successfully gotten the TPSR of Kalifornia seperated from US like hes been trying but hes dam close. So u dont have to worry about customs holding packages up yet but it still may cause cancer there tho

So I think the normal 5-7 days shipping from here should still be in affect.

 

[trigger]

I'm going to order one for my 2020 Talon X tomorrow. Have a hot ride coming up at the end of August and want to have time to put it in.
Not sure how long it takes to get to Northern California.

These are sent out USPS two day priority. My guess would be 3 to 4 days to Cali. from the time it's sent out.

 

[lowranger]

These are sent out USPS two day priority. My guess would be 3 to 4 days to Cali. from the time it's sent out.

Perfect! Thanks @trigger

 

[lowranger]

Order placed.

 

[ChadD]

These are sent out USPS two day priority. My guess would be 3 to 4 days to Cali. from the time it's sent out.

Order placed.

 

[Remington]

These are sent out USPS two day priority. My guess would be 3 to 4 days to Cali. from the time it's sent out.

I dont think he seen any amusement about his country's Government
All facts…

USPS? Add 2 more days just for spite with them. Everything i ship with USPS seems to b correct 10%of the time of what they say.
But hope they get it right this time tho

 

[lowranger]

You gotta love California weather. Ride all year.

 

[Glock21user]

You gotta love California weather. Ride all year.

That may be true but there is not one freedom worth the trade for riding time.
For free peoples cam ride as they please, where they please.

 

[lowranger]

That may be true but there is not one freedom worth the trade for riding time.
For free peoples cam ride as they please, where they please.

We're free here. I pretty much do what I want. Hunt, fish, eat wild game have millions of acres of Natural Forest to roam around as we please to camp, hunt fish also. Not sure what makes you think we're not FREE here.