Really. Thought it was because you came in a carton?Exactly!!
They call me Buttermilk! But mostly for the sour aftertaste!
If you’d have bought a side by side instead of a half by half you wouldn’t need the trailerReally. Thought it was because you came in a carton?
I tried to test my CV temps today at 55-60. Cops pulled me over. Didn't like me riding on a moving trailer.
You mean 1/4 x 1/4. Get it right.If you’d have bought a side by side instead of a half by half you wouldn’t need the trailer
Oh yeah... I heated the f*** out of them. And then let them cool.. did That every time I rode until I sent them back!
When me and my cousin we're kids he had a 79' xr 80 we had stop at a creek .He was looking the other and I pissed in his muffler that bike stunk for months lol bahahahaaDid you stop and piss on them. Got to get the temper just right. Don’t use oil!
What are your CV’s running temperature wise?
I’d like to have the temperature of a stock setup compared to a machine with stock axles and a HL lift.
Turf mode and 4-5 miles @ 55-60 mph on the blacktop? Mine seem to be running a little warm. Inner and outter cv’s both sides.
@Delton @Windrock1000 @joeymt33 @snuffnwhisky @CumminsPusher @ohanacreek
And anybody else running a HL lift or a stock machine with stock rear axles.
Awesome.. thank you! And you have a HL lift on as well?OK I just got the time and went for a quick ride for you. It is 90 degrees out and the CV's all started out between 87* and 88* and after the 4-5 mile ride between 55-60 the temps are as follows.
The temps were taken just before the rubber boot on the metal piece.
Driver inner 163* and outer (wheel) 133*
Pass inner 179* and outer 141*
I am thinking that the pass side inner was hotter because of the exhaust, but was do I know.
Are you having issues with front and back, or just back. Boy, we all know you have issues with front & back, but we are talking about your S x S here! HA!Awesome.. thank you! And you have a HL lift on as well?
Yes, I have a HL on the rear and spacers on the front.Awesome.. thank you! And you have a HL lift on as well?
Your numbers are consistent with dad’s stock machine... guess that settles that.Yes, I have a HL on the rear and spacers on the front.
The front CV after the run was 101* both inner and outer on the fronts.
I haven’t ridden it since putting in the fronts... I took the rears out the same night and haven’t had a chance to put the new ones in. That’s tomorrow’s projectAre you having issues with front and back, or just back. Boy, we all know you have issues with front & back, but we are talking about your S x S here! HA!
Your numbers are consistent with dad’s stock machine... guess that settles that.
Thanks again..you saved me some time and trouble putting the stock rears back in just to get the temp.