Do you mind me asking what the cost of the hydro kit is? I have the eagle set up but never looked into that. Curious what it would be to add it to mine.I looked at one of them online but it looked like there were no supports on the blade so I was concerned with it as I also could not find any reviews that made me feel all warm and cozy to just order it. I just ordered an eagle plow with hydro angle kit so we will see how that goes.
Do you mind me asking what the cost of the hydro kit is? I have the eagle set up but never looked into that. Curious what it would be to add it to mine.
I'd be curious to know how they work out. Hopefully when snow season arrives you can let people know? Are they universal do you know?It was $769 with the plow, I believe without it was $799.
The Hydro-turn uses a different push tube (2939u) then you have. The difference is there is a bracket welded to it for the ram on one end and holes drilled for a bracket on the other end. I don't know if you could drill and mount the brackets on both ends to add it or not. If you stopped by there place in Isanti and talked to Jeremy, I think they would work something out for you ( my 66" hydro-turn complete was $1k otd). I used the hydro-turn last year and it worked great and it seem to be a much beefier and better ram then the one I had on my Moose plow (that was made by them) for 10 years. Once you use a hydro-turn you won't go back to a manual angle again. Plus if something were to go wrong with the hydro ram, with 2 bolts you can take it off and put the manual lever back on to still use the plow. Sorry for the bad info I gave you in my other posts. I have a 66" blade NOT a 72" ([HASHTAG]#2927[/HASHTAG]).I'd be curious to know how they work out. Hopefully when snow season arrives you can let people know? Are they universal do you know?
Ihave just purchased a 66' click n go2 but have yet to install it. My dealer told me that I would loose 1 inch of clearance...im picking up a plow Tuesday and just wondering how far the click and go 2 mount hangs down under the machine thanks in advance for the input