2021 Talon PLATE, R. SKID 50421-HL6-A00

[Vegas77]

Hello

I was wondering if anyone had to reorder these skid plates? I have 2 hex bolts that will not come out, and I am feared that I will need to cut the plastic to get those bolts out.

Any ideas on getting these hex bolts out?

Tried~~

Hammer
Flat head

 

[Admin]

 

[CID]

I'd just center punch the head so I'd get a good centered start and drill til the heads pop off. This is how I've removed stuck fasteners, whether small screws or bolts. The skid bolts are 6mm so a 5/16" or 3/8" bit should work fine for you. Once the head is gone, remove the skid and grab the remaining stub with Vise Grips.