2021 Talon Cranks but won't Start

[Smitty335]

What do the =1 and =10 mean?

11

 

[Admin]

 

[HondaTech]

What do the =1 and =10 mean?

Sorry, those are the numbers you add together to get a code. Short blinks are equal to 1 digit and long blinks are early to 10 digits.

Example:
5 long blinks
7 short blinks
Would give you code 57.

 

[Smitty335]

gradesSorry, those are the numbers you add together to get a code. Short blinks are equal to 1 digit and long blinks are early to 10 digits.

Example:
5 long blinks
7 short blinks
Would give you code 57.

Hey Mr Honda Tech, I've been chasing a burnt oil smell for a while, no oil on the shop floor, motor that I can see or skid plate. Dad was riding with me last week and said it smelled like crank case ventilation oil. What's weird is it gets stinky on long down hill grades with no braking? With throttle applied no smell?

 

[HondaTech]

Hey Mr Honda Tech, I've been chasing a burnt oil smell for a while, no oil on the shop floor, motor that I can see or skid plate. Dad was riding with me last week and said it smelled like crank case ventilation oil. What's weird is it gets stinky on long down hill grades with no braking? With throttle applied no smell?

The only crankcase vent on the Pioneer is in the valve cover, vents directly to the airbox. Might check and see if it's come on either end. I've seen them left off and they don't make enough of a mess usually to show an oil leak.

 

[Hondasxs]

11

Holly bonkers... @Smitty335 with a correct answer.. hahaha.

 

[Smitty335]

Holly bonkers... @Smitty335 with a correct answer.. hahaha.

I'm on a roll tonight, anything else you want to know tonight? HA!

 

[Smitty335]

The only crankcase vent on the Pioneer is in the valve cover, vents directly to the airbox. Might check and see if it's come on either end. I've seen them left off and they don't make enough of a mess usually to show an oil leak.

Thanks!

 

[ScottJ24]

Sorry, those are the numbers you add together to get a code. Short blinks are equal to 1 digit and long blinks are early to 10 digits.















Example:







5 long blinks







7 short blinks







Wyou a code 57.







Sorry, those are the numbers you add together to get a code. Short blinks are equal to 1 digit and long blinks are early to 10 digits.







Example:



5 long blinks



7 short blinks



Would give you code 57.

 

[ScottJ24]

Where can I find info on what the codes are?

 

[Smitty335]

Where can I find info on what the codes are?

Probably here if you are a Supporting Member?

 

[ScottJ24]

What pattern is the CEL flashing.

So I just checked the CEL and it's flashing 8 long and 1 short so 81 if I'm not mistaken.

 

[ScottJ24]

Problem solved. I had installed a wiring kit to the subtrans harness to activate a backup light. I removed it and everything is back to normal. I tried to re install it and the same problem and no no pins were bent. I made sure to seat both ends all the way. At least it runs now.

 

[DRZRon1]

always more to the story……..That tidbit of info woulda saved a lot of drama and grief for those who get emotionally vested in getting ya back running -

generally it’s the last thing touched or modified that’s the problem - lol

 

[906UP]

always more to the story……..That tidbit of info woulda saved a lot of drama and grief for those who get emotionally vested in getting ya back running -

generally it’s the last thing touched or modified that’s the problem - lol

Yup

 

[GovtMule]

always more to the story……..That tidbit of info woulda saved a lot of drama and grief for those who get emotionally vested in getting ya back running -

generally it’s the last thing touched or modified that’s the problem - lol

Wordz of wizdem there!!!

 

[HondaTech]

Apologies for not getting back to you.

Code 81 is for the Sub Trans gear position switch, which is of course where you found your issue.