Talon 14" Wheels on an R

[jasond]

Can anybody confirm/deny that 14" wheels can be run on a 1000R?

I'm picking up my R on Saturday and would like to go ahead and order beadlocks if I can get confirmation ahead of time that they don't interfere with the brake caliper and/or the upper/lower a-arms.

 

[Admin]

 

[Vondy]

I would like to know for sure as well. I read where one person put them on and they worked, but clearance was very tight.

 

[Neohio]

I would like to know for sure as well. I read where one person put them on and they worked, but clearance was very tight.

I believe @my99svt threw his 14's on his before signing on the dotted line.
If you have a failure next week, I'm sure we can bolt a 14 on with a spacer if needed to get you back to camp.

 

[jasond]

Specifically, I’m looking at a 14” with a 5+2 offset so I can run the 30” Carnivores that I already have or a set of 29” Bighorns that I have.

If push comes to shove, then I’ll order a 15” set of wheels and a new set of tires, but there are so many more options with a 14” wheel.

@my99svt are you able to chime in on this subject?

 

[nbomar]

Specifically, I’m looking at a 14” with a 5+2 offset so I can run the 30” Carnivores that I already have or a set of 29” Bighorns that I have.

If push comes to shove, then I’ll order a 15” set of wheels and a new set of tires, but there are so many more options with a 14” wheel.

@my99svt are you able to chime in on this subject?

They fit.



Sent from my iPhone using Tapatalk

 

[jasond]

View attachment 125079

They fit.



Sent from my iPhone using Tapatalk

Great, thank you. Forums are wonderful things.

 

[spentcoins]

Great, thank you. Forums are wonderful things.

jasond, when you put yours on let us know the measurements outside front and rear tires. I have a set of 32" Carnivores I would like to use and just need 14" wheels, the right offset of course.

 

[jasond]

jasond, when you put yours on let us know the measurements outside front and rear tires. I have a set of 32" Carnivores I would like to use and just need 14" wheels, the right offset of course.

I’ll report back. I plan to start a full build thread so I’ll have a good amount of information on there. I also have a YouTube channel and I’m sure I’ll be putting videos up as well as I go.