“Clutch’s Basket” build

[CumminsPusher]

View attachment 130173

It could still use a little work I'm sure, but it is a solid rough draft.

I really got that decal in there sideways lol.
Hey can you superimpose this over??

 

[Admin]

 

[NTCPrezJB]

I really got that decal in there sideways lol.
Hey can you superimpose this over??
View attachment 130175

I can give it a shot for you. I don't have any real photo editing tools but it should be good enough to give you an idea at least.

 

[ohanacreek]

View attachment 130173

It could still use a little work I'm sure, but it is a solid rough draft.

I'd remove the warning, it'll be your fault....

 

[CumminsPusher]

I can give it a shot for you. I don't have any real photo editing tools but it should be good enough to give you an idea at least.

I’m not good with that stuff I thought maybe you had some fast editor. If it’s a pain don’t worry about it I was just curious. Still thinking of other ideas. Gotta do something that doesn’t clash too bad. Always wanted something but wasn’t going to waste time on the roll up door

 

[NTCPrezJB]

I really got that decal in there sideways lol.
Hey can you superimpose this over??
View attachment 130175

So...it isn't exactly an awesome rendition, but here you go.

 

[NTCPrezJB]

I’m not good with that stuff I thought maybe you had some fast editor. If it’s a pain don’t worry about it I was just curious. Still thinking of other ideas. Gotta do something that doesn’t clash too bad. Always wanted something but wasn’t going to waste time on the roll up door

I think continuing the theme that you guys did on the side would end up working well. Much better than what I can represent in Paint for you. lol

 

[CumminsPusher]

Had the time so went ahead and sprayed some bed liner on the Basket ramp.

Quick sand with 40 grit and seam sealed all the edges.

Epoxy primer

And done. Figured since I had the time might as well protect the gate.

 

[Plumber32]

View attachment 130173

It could still use a little work I'm sure, but it is a solid rough draft.

That's awsome!

 

[CumminsPusher]

That's awsome!

Sure encourage him
Actually going to use this part probably same fonts but smaller and larger words at bottom.

Actually sounded perfect. Thank you @JeremieBaker!

 

[BWAF]

Had the time so went ahead and sprayed some bed liner on the Basket ramp.
View attachment 130516
Quick sand with 40 grit and seam sealed all the edges.
View attachment 130517
Epoxy primer
View attachment 130518
And done. Figured since I had the time might as well protect the gate.

Looks dam nice

Sent from my SM-G930U using Tapatalk

 

[NTCPrezJB]

Had the time so went ahead and sprayed some bed liner on the Basket ramp.
View attachment 130516
Quick sand with 40 grit and seam sealed all the edges.
View attachment 130517
Epoxy primer
View attachment 130518
And done. Figured since I had the time might as well protect the gate.

Looks awesome CP.


Sent from my iPhone using Tapatalk

 

[NTCPrezJB]

Sure encourage him
Actually going to use this part probably same fonts but smaller and larger words at bottom.
View attachment 130537
Actually sounded perfect. Thank you @JeremieBaker!

Hahaha.
You’re welcome sir! Truly a happy accident apparently.


Sent from my iPhone using Tapatalk

 

[Tigermark]

Sure encourage him
Actually going to use this part probably same fonts but smaller and larger words at bottom.
View attachment 130537
Actually sounded perfect. Thank you @JeremieBaker!

Just add PNW Legend under the words “ask and you” and it will be perfect!

 

[BWAF]

Just add PNW Legend under the words “ask and you” and it will be perfect!

Yes @CumminsPusher just own it !!! That's what I did with the AF

Sent from my SM-G930U using Tapatalk

 

[NTCPrezJB]

Yes @CumminsPusher just own it !!! That's what I did with the AF

Sent from my SM-G930U using Tapatalk

X2! (no wolvie)

 

[CumminsPusher]

Been a long time since posting here, we’ve just been enjoying the camper and have had absolutely no problems. Drive the camer all last year without current tabs on it even, it’s been cheap and solid.
It’s worked fine how it’s been but still cold out at night and we are planning to camp out if Washington locks down so we’re finally adding some insulation to conserve on energy usage. Be done with that today

Gotta give my son props. He’d bought an enclosed to build awhile ago but got distracted by the low price of toyhaulers for a bit. After learning more about the maintenance and care needed he decided to build on from something a bit more solid and save cash. Will take the dirt roads to camp much more favorable. It’ll also be equipped with full bathroom and all amenities. He’s not afraid to work hard for what he needs and his girlfriend is helping as well. I’m pretty proud of him!

 

[CumminsPusher]

Didn’t know there was that much room in the van. First time we had bike in there too. Looks like two will go in no issue. Good to know, be bringing bikes more often.

 

[WillyBill]

Good to see your retractor reel for the ramp is still working well

 

[Sheetmetalfab]

By the letter of Ohio law, if it has a fifth wheel, it cannot be titled as an rv. I don't know how people get around that. Another option is title it as an RV out of Ontario. I am considering getting a Non commercial CDL just to cover my ass.

convert to gooseneck hitch? 😂

 

[CumminsPusher]

Good to see your retractor reel for the ramp is still working well

Ya well over 1000 miles of messed up dirt roads alone and all good. Stayed put. Thanks again for helping adjust those.