P700 Wooden Wheels. Turning Amish?

[Ridinfool]

I cant remember if you have personally given me a welcome or not, but have seen you around. I stay mostly in the 700 forum, but venture out now and again. Thanks for the welcome today and possibly the last time too 😂

You gotta have a good time! Life's too short for anything else.


View attachment 251864

How. Does that even happen?

I’m guessing it was either donuts, or hold my beer or all of the above.
I’m going with D... all of the above.

 

[Admin]

 

[Ridinfool]

I guess if traction is a issue you could cut up a bicycle tire and secure it around the circumference of each wood disk.

WTF??? Bicycle tires??? Com on man... why you trying to class this up? Garden hose all the way.

 

[Craigtom86]

What part of GRR you from? I used to work at the GM plant on 36th st & 131. Lived North of town......Grant/Newaygo area

I’m south of GR about 15 mins. Hudsonville area (Jamestown). I’ve got a cottage on Canadian lakes in Mecosta County.

 

[Vikes79]

WTF??? Bicycle tires??? Com on man... why you trying to class this up? Garden hose all the way.

Just trying to get some raised white letters on the disks I guess?

 

[Craigtom86]

I guess if traction is a issue you could cut up a bicycle tire and secure it around the circumference of each wood disk.

I wondered if I’d have any issue. It worked fine as is.

 

[Craigtom86]

How does It do in mud and won't It be hard to shove a plug in if you get a flat

I think you mean dowel, not plug.

 

[Backwoods]

I'm impressed you were a good sport. Welcome to the forum. With your sense of humor you should check out the #NTC.

 

[Haldog77]

Hey all,
Just thought I'd share this method for fitting your SXS in an enclosed trailer. I've got a 16' enclosed and my 700-4 has a roof and 27" tires. Needless to say it didn't fit in the trailer even with the tires aired down and the roof removed it still wouldn't fit. What I did was buy some 12" diameter wooden disc and drilled them to fit the bolt pattern. I slapped these new "amish" wheels on and now have plenty of clearance to load it in the trailer. This might not be a great method for someone trailering to their riding destination every week but I have a cottage about an hour away and my SXS lives there most the time. Either way a jack and a cordless impact makes this a 10 minute ordeal. Not a big deal. Total cost was about $25 for the wood and took me about 30 mins to drill them. Maybe this will help somebody out.
View attachment 251633View attachment 251634View attachment 251635

Hey look at it this way, you could always do a burn out to start your camp fire.


#NTC

 

[906UP]

I’m south of GR about 15 mins. Hudsonville area (Jamestown). I’ve got a cottage on Canadian lakes in Mecosta County.

Used to buy our sleds at Lakeside, before they went "gigantor" & moved into the new building. @aprils_fool is in the Big Rapids area, he's got a cabin UP here not far from my place.

 

[Craigtom86]

Used to buy our sleds at Lakeside, before they went "gigantor" & moved into the new building. @aprils_fool is in the Big Rapids area, he's got a cabin UP here not far from my place.

What are your thoughts on Lakeside? So far, I like them.

 

[Craigtom86]

@SuperATV .... maybe your R&D group wants in on this market as well.

Patent pending.

 

[Craigtom86]

Have you got'n it on the trailer yet? Looks like it wood 😉 get high centered on the ramp. Or just do a nice wood burn out on the way up the ramp

No high center. Worked great.

 

[Craigtom86]

What's the smallest size I can run without rubbing parts on the ground?

About this. Lol.

 

[Craigtom86]

If you get a winch on that thing then you could winch it in and out of your trailer, as well as using it to change the tires out.

Who needs a winch with this tread? For real though, it drives in and out of the trailer just fine.

 

[Smitty335]

I cant remember if you have personally given me a welcome or not, but have seen you around. I stay mostly in the 700 forum, but venture out now and again. Thanks for the welcome today and possibly the last time too 😂

You gotta have a good time! Life's too short for anything else.


View attachment 251864

You have some esplaning to do with this picture! HA!

 

[906UP]

What are your thoughts on Lakeside? So far, I like them.

They still have the best prices around, they lost the personal "small town" feel but thats the price of success. Ed has built a very successful business, he owns Nelson's in Greenville too. I dont get down to that part of the mitten much anymore.

 

[Todd627]

I’m going with the D.

WTF Bro...J80 finally get ya? 🤣 😂🤣😂

 

[Ridinfool]

WTF Bro...J80 finally get ya? 🤣 😂🤣😂

No, but if did you wood have got this...
🖕🖕🖕🖕🖕🖕🖕🖕🖕🏆

 

[livefromthetree]

I used to

How. Does that even happen?

When I was younger and more bend than break I would plow much faster than I do nowadays. Lil brother and pops standing there shaking their heads 😂

 

[livefromthetree]

What's the chances this is making the rounds on the web the last couple days?