P1000 Wheel Spacers

[chipolariverman]

So I have searched but can not find what I am looking for. If I put 28x10x14 Terrabites all the way around my P1k3 on 5/2 Tusk beadlocks do I have to put wheel spacers on the rear? Is the only reason for the spacer is to make it track the same? Does it make it handle any different? I know it will widen the stance but honestly for what I do I do not want the machine any wider than factory.

Just FYI I have the exact tire/wheel combo on another machine and I have not noticed any difference in the handling.

 

[Admin]

 

[DDDonkey]

Spacers are not required but a preference for many to have the rear track the same as the front.

 

[chipolariverman]

Spacers are not required but a preference for many to have the rear track the same as the front.

So my concern is I normally haul between 600-800 lbs in the bed, would there be a concern of possibly searing or breaking them due to the weight and stress?

 

[Smitty335]

So my concern is I normally haul between 600-800 lbs in the bed, would there be a concern of possibly searing or breaking them due to the weight and stress?

Check out Race Line Wheels, they have different wheel off sets for the same wheel

 

[t-bear]

Check out Race Line Wheels, they have different wheel off sets for the same wheel

But then you lose the ability to perform either a four wheel rotation or five if you have matching spare.

FWIW I just put RB3 Offroad 1" spacers on my rear. High quality.

 

[Smitty335]

But then you lose the ability to perform either a four wheel rotation or five if you have matching spare.

FWIW I just put RB3 Offroad 1" spacers on my rear. High quality.

I have never rotated a tire other than forward and reverse gear. A spare, never needed one, I keep good ITP tires on Rooster, never had a flat on them. Second set now, made in the good ole USA!