P1000 Wheel offset

[smokebuzz]

My plans are to put 15x7 wheels and 235/75/15 tires on my stock P1kLE. I see many recommend a 5+2 wheel, but would a 4+3 get the tire out farther to avoid rubbing? I also plan on 1" spacers in the rear.

 

[Admin]

 

[Sjc3081]

5+2 wheels will increase your front width to 67” from factory 63” and rear to 66”. 235/715/15 are going to rub at full lock and compression. Save yourself money use stock wheels and get 27” Maxxis Buckshot Mudder II. They are stock height lighter than 235/75. They wont rub and less power loss.

Homepage

www.maxxis.com

 

[smokebuzz]

I'm want 2 sets of wheels and tires, just measuring the factory tires and wheels, it appears there is plenty of room on my machine to fit LT tires.. Oddly the factory tire measure an inch short of what the sidewall says..

Sent from my SM-G960U using Tapatalk