P1000 Wheel offset question C fab arms

[Mdslawn]

Alright so I’m looking at doing the c fab arched arms with the lift built in and I’m not wanting to run wheel spacers . I have been told I need a 3+4 offset but in all of my searching I can’t not find a single 15 “ wheel that offers that off set . Most all I see is 5+2 or 4+3. Which wheels are y’all running with the cfab lift on your pioneers without wheel spacers and pictures if you have them . I’m wanting to run the 30x9.50-15 Nitto trail grappler sxs

 

[Admin]

 

[GlockMeister]

If you run spacers you will be able to rotate your tires...otherwise i think you will need a 6+1 front and a 4+3 rear. I run 5+2 wheels with 1" front and 2" rear spacers

 

[Mdslawn]

If you run spacers you will be able to rotate your tires...otherwise i think you will need a 6+1 front and a 4+3 rear. I run 5+2 wheels with 1" front and 2" rear spacers

Gotcha I didn’t know that . So I def wanna rotate them so I will prob do same setup as you since the wheels I like are 5+2 .Your setup they aren’t sticking out to wide are they? You have some pics

 

[GlockMeister]

Its wide..but that add stability...think im around 68" sorry not the greatest pic. Ive run this setup for years now

 

[BigOL3]

Alright so I’m looking at doing the c fab arched arms with the lift built in and I’m not wanting to run wheel spacers . I have been told I need a 3+4 offset but in all of my searching I can’t not find a single 15 “ wheel that offers that off set . Most all I see is 5+2 or 4+3. Which wheels are y’all running with the cfab lift on your pioneers without wheel spacers and pictures if you have them . I’m wanting to run the 30x9.50-15 Nitto trail grappler sxs

Just curious, why you going with 15" wheels?

 

[Mdslawn]

Just curious, why you going with 15" wheels?

Mainly because the tire i want only comes in a 15