Wheel Bearing Replacement Problems

[SLOWPOKE693]

Where did all the $150 rotors go? I needed an extra rotor to send out to be cut like the other 4 I had done and when I went looking they were all well over $250 at the online parts houses. I ended up finding a new open box rotor on Ebay for a reasonable price but still..... I can get 14" Wilwood scalloped, drilled and vented racecar rotors for less money than Honda wants for a flat piece of stainless steel. 🙄

 

[Admin]

 

[HondaTech]

Where did all the $150 rotors go? I needed an extra rotor to send out to be cut like the other 4 I had done and when I went looking they were all well over $250 at the online parts houses. I ended up finding a new open box rotor on Ebay for a reasonable price but still..... I can get 14" Wilwood scalloped, drilled and vented racecar rotors for less money than Honda wants for a flat piece of stainless steel. 🙄

Retail is $363
Cost is $199

 

[Dankathy]

Where did all the $150 rotors go? I needed an extra rotor to send out to be cut like the other 4 I had done and when I went looking they were all well over $250 at the online parts houses. I ended up finding a new open box rotor on Ebay for a reasonable price but still..... I can get 14" Wilwood scalloped, drilled and vented racecar rotors for less money than Honda wants for a flat piece of stainless steel. 🙄

Have no idea what the material is, but if you are set up to customize why not just make your own? Add 4 counter sunk holes and sell them for $200?

 

[CID]

Have no idea what the material is, but if you are set up to customize why not just make your own? Add 4 counter sunk holes and sell them for $200?

@highpocket74

 

[Scoop]

Where did all the $150 rotors go? I needed an extra rotor to send out to be cut like the other 4 I had done and when I went looking they were all well over $250 at the online parts houses. I ended up finding a new open box rotor on Ebay for a reasonable price but still..... I can get 14" Wilwood scalloped, drilled and vented racecar rotors for less money than Honda wants for a flat piece of stainless steel. 🙄

 

[Smitty335]

View attachment 403380

Go work on your boat dock! Really how's that coming along?

 

[Scoop]

Go work on your boat dock! Really how's that coming along?

Waiting for the check from the insurance company for the rolling dock system. Same goes for the boat itself. At least we were able to get the roof on the house/barn/outbuilding replaced without too much fanfare - it was the first of three claims in a ~2 month period.

 

[SLOWPOKE693]

Retail is $363
Cost is $199

Both prices are f#*ktarded.

 

[SLOWPOKE693]

View attachment 403380

Ya, that's no $hit.

 

[ODAMO]

Retail is $363
Cost is $199

Is that price for one or all four?

 

[HondaTech]

Is that price for one or all four?

1 rotor, same front and rear

 

[Dankathy]

Seems like lots of room for the aftermarket here. Don't know how much demand there is for talon specific rotors, but if someone is already doing others...... dayum

 

[Dankathy]

@SuperATV ?

 

[HondaTech]

All Balls makes rotors
$90 a piece

 

[SLOWPOKE693]

All Balls makes rotors
$90 a piece

Those are Chinese pieces of trash and all 4 rotors are cut the same. Not very awesome to have the slots facing the wrong direction on one side of the machine. 🤣

 

[Upstate NY 1000X-4]

There's wildwood

Wilwood Disc Brakes

2020 Honda SXS10S2R Talon 1000R BasePart No: 140-17038, brakes, disc brakes, big brakes, bbk, brake conversion kit, bolt-on brake kits, front brakes, calipers, axle flange, housing, rotors, dynalite, dynapro, superlite, d52

www.wilwood.com

 

[Scoop]

Cause when two-fiddy is too ridonkulous for one rotor, ya might as well drop a band and a half for a full front brake setup ... 🤑

 

[Smitty335]

Cause when two-fiddy is too ridonkulous for one rotor, ya might as well drop a band and a half for a full front brake setup ... 🤑

This is getting as bad as bass fishing!

 

[Upstate NY 1000X-4]

Cause when two-fiddy is too ridonkulous for one rotor, ya might as well drop a band and a half for a full front brake setup ...

Well, you gotta do the rears, too!

 

[SLOWPOKE693]

PM machine sells a Talon brake upgrade kit too. It's like $2500 but comes with new rotors all the way around and some bling billet calipers with all the pistons. 😆