P700 What did you do to/with your Pioneer 700 today?

[Reloder28]

I've been looking to add an aux battery on my 700. let me know where you install the battery. I have set up the isolator, second fuse panel, Side mirrors with bright flood and spot lights built in, radio with rear speakers mounted on the roll bar, rear light, rocker switch plate. having a blast with my first sxs.

You have been busy!
If you lift the thin rubber flap under the driver side seat you will find a cavernous hole there perfectly suited for the addition of an auxiliary battery. You will have to remove the side body panel. Be sure to buy some plastic rivet remover pliers from Harbor Freight for $10. You will find them in the Auto Body section. The pliers, a #2 Phillips & a 5mm Allen Wrench will do the job. I cut two 20” lengths of B Line shallow Unistrut which you can source from Lowe’s in 24” pieces. Those will span the gap & provide ample structure to support a 50# battery & can be found with all the conduit clamps. Attach them with 1 1/4” one hole conduit straps. I bought a $20 battery tray from Jegs.com.

 

[Admin]

 

[Reloder28]

Want to share in picture form? Sounds like Great additions!

I plan to do so when I’m completely finished. May be another week or so.

 

[dalis7393]

You have been busy!
If you lift the thin rubber flap under the driver side seat you will find a cavernous hole there perfectly suited for the addition of an auxiliary battery. You will have to remove the side body panel. Be sure to buy some plastic rivet remover pliers from Harbor Freight for $10. You will find them in the Auto Body section. The pliers, a #2 Phillips & a 5mm Allen Wrench will do the job. I cut two 20” lengths of B Line shallow Unistrut which you can source from Lowe’s in 24” pieces. Those will span the gap & provide ample structure to support a 50# battery & can be found with all the conduit clamps. Attach them with 1 1/4” one hole conduit straps. I bought a $20 battery tray from Jegs.com.

Thank you for the help. Do you have any photos of your work?

 

[KeithinLouisiana]

Pulled my camper home and put the P700 in the backyard first week of January. Mississippi River now below flood stage so the fifth wheel is back at camp. After sitting almost 6 months the P700 Is now happy again running the roads at the camp. Pulled the cover off and hit the key. 5 seconds later it was running great. Didn’t even need to charge the battery. Love the 700. Great reliability.

 

[Pedpole]

Today I installed a KFI winch mounting plate and Badlands ZXR winch and changed the cable to a synthetic rope. Also installed a Crossroads SXS switch plate but quit when I got to the wiring because I am second guessing myself On how to do it. My plan was to wire. + busbar from the battery then run the + from the winch to the bus bar and also power stinger solenoid from the bus bar. The second lead from the stinger would power a separate fuse panel which I would power the winch switch from along with a usb charger both on separate fuses. The stinger would get power from the key on harness from the club store which connects to the cigarette lighter.
Why I am second guessing myself is the supplied winch switch has 3 wires black, blue and red which I assume is the keyon power since there isn’t an end on it. I don’t know how to wire the 7 pin switch I purchased for this. Also I am confused on the fuse panel because it looks like for each circuit you wire a + on one side of the fuse and - on the other.
In the future I may add a second battery but for now will run one but would like to set it up so I am ready to add the second battery.
Looking for some input on wiring this up so it is done correctly.
Today I installed a KFI winch mounting plate and Badlands ZXR winch and changed the cable to a synthetic rope. Also installed a Crossroads SXS switch plate but quit when I got to the wiring because I am second guessing myself On how to do it. My plan was to wire. + busbar from the battery then run the + from the winch to the bus bar and also power stinger solenoid from the bus bar. The second lead from the stinger would power a separate fuse panel which I would power the winch switch from along with a usb charger both on separate fuses. The stinger would get power from the key on harness from the club store which connects to the cigarette lighter.
Why I am second guessing myself is the supplied winch switch has 3 wires black, blue and red which I assume is the keyon power since there isn’t an end on it. I don’t know how to wire the 7 pin switch I purchased for this. Also I am confused on the fuse panel because it looks like for each circuit you wire a + on one side of the fuse and - on the other.
In the future I may add a second battery but for now will run one but would like to set it up so I am ready to add the second battery.
Looking for some input on wiring this up so it is done correctly.

 

[rebelx5150]

Graphics kit and rims + tires today!

 

[Reloder28]

Thank you for the help. Do you have any photos of your work?

I will soon.

 

[JimmyA]

I power washed mine today! Mama says it looks new...….. Pics coming soon!

 

[Backwoods]

I power washed mine today! Mama says it looks new...….. Pics coming soon!

Let's see it.

 

[livefromthetree]

Just a little ride last eve

 

[Backwoods]

Just a little ride last eve

View attachment 210786

Good pic liked like a pretty evening

 

[livefromthetree]

Good pic liked like a pretty evening

Yep it was a nice one...but it was toasty

 

[FlipKing]

Put out 1000lbs of feed and drug a 25ft tree half a mile.

 

[Backwoods]

Went for a Sunday ride around the house . Here's a random Sunday evening pic

 

[Backwoods]

😆

I power washed mine today! Mama says it looks new...….. Pics coming soon!

Your overdue on the pics I bet it's still dirty

 

[SWB]

Installed winch today. It was ok install but could have happened a little faster. I would have been happier. HX 98 today.

 

[DG Rider]

Installed winch today. It was ok install but could have happened a little faster. I would have been happier. HX 98 today.

I tend to take my time on such things. Put on a podcast or music and sip some adult beverages.

 

[SWB]

I tend to take my time on such things. Put on a podcast or music and sip some adult beverages.

I did too really. Its done right. Just hot out there. Started do it this morning, but didn't have want too.

 

[DG Rider]

I finished up my winch install.
I don't like having the contacter "live" day in and day out. Especially with a wireless remote (which I don't have this time), so I usually run a switch to the contacter, tapped off the power port. I installed that this evening.

 

[Mudwing]

Finished the maintenance for this go around and reset the maintenance minder. 😉😎