W
Westtnpioneer
Edjumacated
Lifetime Member
Supporting Member
Has anyone installed Walker Evans with Highlifter lift and SuperATV arms? I know you can flip the Fox QS3's, however it appears that the WE will not do this.
I have the 3 inch SATV lift and their A-arms with Walkers on all four corners. No problems with that set up.....Has anyone installed Walker Evans with Highlifter lift and SuperATV arms? I know you can flip the Fox QS3's, however it appears that the WE will not do this.
I bought them used and the former owner zip tied them to the correct ends. Upon careful inspection though, none of them where gold in color and I could not see a visual difference in any of them. I have the highlifter lift and 30" Roctanes. I'm afraid the tire is going to hit the front reservoir.I have the 3 inch SATV lift and their A-arms with Walkers on all four corners. No problems with that set up.....
I went with 250lb. Springs all around.
If you go with Walkers make sure you get the bushing spacers on right they come with no instructions!
I bought them used and the former owner zip tied them to the correct ends. Upon careful inspection though, none of them where gold in color and I could not see a visual difference in any of them. I have the highlifter lift and 30" Roctanes. I'm afraid the tire is going to hit the front reservoir.
Any up close pics of the front? I'm running a 14" wheel with a 5-2 offset.I run 30x9.5x16s no rubbing on my set up
No pics on hand got the front apart right now for new axles......Any up close pics of the front? I'm running a 14" wheel with a 5-2 offset.
Please do.No pics on hand got the front apart right now for new axles......
Should be back together this weekend, if you still want them I'll post some pics and measurements.