I
Yes, it has enough room for both the Rancher and the P500. I'll post a picture shortly when I get some time.Do you have enough room with s 12??
I was thinking about that but I thought a 12 would be tight..
Please let me know
Yes, it has enough room for both the Rancher and the P500. I'll post a picture shortly when I get some time.Do you have enough room with s 12??
I was thinking about that but I thought a 12 would be tight..
Please let me know
That would be awesome....Yes, it has enough room for both the Rancher and the P500. I'll post a picture shortly when I get some time.
Hey BamaBound, I have a 6 x 12 enclosed Lark trailer, Inside dimensions are 11'-4" L (13'-2" to V-nose) x 5'-8" W x 6'-6" H - Door is 5'-3" W x 6'0-1/2" H. My 2017 fits fine, open trailer side access door, drive in forward, set brake, exit through passenger side. Tie down on 4 corners and your done. Plus I like the "out of sight, out of mind" concept that no one knows whats inside. I did end up getting the EMP aluminum roof because I didn't think the OEM roof would fit.I'm looking at an Integrity 6 x 12 enclosed trailer. The inside height is 6 1/2 feet tall. If I my math is right the P 500 is about 6 feet tall...correct?
Thanks for the picsHere's a pic with both loaded. For some reason it wouldn't load with the previous post.
View attachment 29901
I use a 5 X 8 tilt with no sides and works fine. Just tilt and back it up until the wheels hit the very back of the trailer to add a little tongue weight. The emergency brake will hold it in place until you tilt it down. My trailer is a Gatormade.i just purchased a new Pioneer 500 and I need a trailer. I read where the P-5 is 103 inches long. Is anyone using an 8x5 trailer with a ramp? I may have to go with the 5x10 or 6x10 if the 5x8 with a ramp won't fit the Pioneer.
Did you weld the pieces of angle to the two existing latches or just drill holes in them and bolt them through the existing latch hole opening?I have a 5 x 8 trailer. I put two pieces angle on the two latches that gives me about 4 inches of extra length. The holes fit too.
View attachment 12653
No, I just drilled holes and used the latch opening that I had. But I don't have that trailer anymore. It was too light. This is what I bought.
View attachment 115469
This is a 6.5 x 12. This is what I have now.Is this a 6'x10' trailer?