The OG Build - 2019 Talon R with 35,106 miles.

[Hometeam]

I picked this beauty up off a guy I know in Tennessee. He bought it new and has put all the miles on it. Most have been road miles but he did trial ride too. It is a 2019 Honda Talon R with 35,106 miles, the ssv radio, windshield with powered wiper, turn signals, rear window, upper enclosure, 32 ITP, light bar, etc. I paid 10k for it. The only thing he has replaced is the rear 2 axels for clicking. Everything else is original. I plan to do the usual things to it right away. This is our 4th Talon. This one is for our 15yo (or anyone else that comes) to drive. Here is the start of my list:

-Factory UTV 1/2 skid (I like this skid for its full coverage up high on the front and rear)
-CA Tech rear radius rods
-CA Tech shift gate
-new prop shaft (I have one with welded caps already sitting in the shed as a spare)
-Simpson harnesses
-lower aarms (undecided on brand)
-beadlocks and 32 or bigger tires
-probably a winch
-Full Cage (undecided which brand but I need 3)
-front ball joints (undecided which brand)

There is a little tick that I can hear start to sound after it has warmed up a little. If it ends up being a problem then I will rebuild it.

 

[Admin]

 

[JenElio]

I picked this beauty up off a guy I know in Tennessee. He bought it new and has put all the miles on it. Most have been road miles but he did trial ride too. It is a 2019 Honda Talon R with 35,106 miles, the ssv radio, windshield with powered wiper, turn signals, rear window, upper enclosure, 32 ITP, light bar, etc. I paid 10k for it. The only thing he has replaced is the rear 2 axels for clicking. Everything else is original. I plan to do the usual things to it right away. This is our 4th Talon. This one is for our 15yo (or anyone else that comes) to drive. Here is the start of my list:

-Factory UTV 1/2 skid (I like this skid for its full coverage up high on the front and rear)
-CA Tech rear radius rods
-new prop shaft (I have one with welded caps already sitting in the shed as a spare)
-Simpson harnesses
-lower aarms (undecided on brand)
-beadlocks and 32 or bigger tires
-probably a winch
-Full Cage (undecided which brand but I need 3)
-front ball joints (undecided which brand)

There is a little tick that I can hear start to sound after it has warmed up a little. If it ends up being a problem then I will rebuild it.

View attachment 383917View attachment 383918View attachment 383919View attachment 383920View attachment 383921View attachment 383922

That's sweeeeeet!!!!!!........ can't hide money!!!!!!😂

 

[Ohio4x4]

How the hell do you put 35k on a talon with stock arms. This guys needs a trophy.

 

[HondaTech]

KRASH Offroad for cage!!

2trakfab driveshaft

 

[JenElio]

How the hell do you put 35k on a talon with stock arms. This guys needs a trophy.

🤔.... obviously he doesn't follow any of us on the trails. And he's definitely never followed @TripleB or @Adam490 up and down a mountain....😬

😂😂😂

 

[Blownzuki]

I have seen you drive, get a cage asap!!

 

[Hometeam]

KRASH Offroad for cage!!

2trakfab driveshaft

I have been considering Krash. We have a Krash cage in our other red R and a Krash cage on our YXZ. I have also considered WCFab, Filthy Freedom Fab, and Razor Sharp customs. I want 3 of the same cage and would like windshields on then.
2Traxfab definitely has a sweet driveshaft out!! I like it alot and have ridden with Erin before.....great dude.
Have you installed a SATV driveshaft yet?

 

[Hometeam]

How the hell do you put 35k on a talon with stock arms. This guys needs a trophy.

A lot if his miles were road miles so it really didn't get abused....boy is it in for a wakeup call with us!!! My kids will test it out!! 🤣

 

[Adam490]

How the hell do you put 35k on a talon with stock arms. This guys needs a trophy.

I have a friend that can help him turn all of them into high clearance arms pretty quick! He’s a pro at it

@Bcavin351 …..

Oh, @Hometeam I’ll make you a pretty good deal on these. Unpictured are the other two blue ones he also “upgraded” that I’ll throw in for free!

 

[Hometeam]

@SuperATV Can you tell me if your Atlas front aarms come with the Honda bushings installed?

 

[HondaTech]

I have been considering Krash. We have a Krash cage in our other red R and a Krash cage on our YXZ. I have also considered WCFab, Filthy Freedom Fab, and Razor Sharp customs. I want 3 of the same cage and would like windshields on then.
2Traxfab definitely has a sweet driveshaft out!! I like it alot and have ridden with Erin before.....great dude.
Have you installed a SATV driveshaft yet?

We've only done the 2trakfab shaft in our racecar. We don't use SuperAtv unless we have to or customer request it

 

[Vondy]

That's a good deal, even with 35k on it. I need to find me one of those deals, I'd like to pickup a 2 seat R sometime.

 

[Remington]

I picked this beauty up off a guy I know in Tennessee. He bought it new and has put all the miles on it. Most have been road miles but he did trial ride too. It is a 2019 Honda Talon R with 35,106 miles, the ssv radio, windshield with powered wiper, turn signals, rear window, upper enclosure, 32 ITP, light bar, etc. I paid 10k for it. The only thing he has replaced is the rear 2 axels for clicking. Everything else is original. I plan to do the usual things to it right away. This is our 4th Talon. This one is for our 15yo (or anyone else that comes) to drive. Here is the start of my list:

-Factory UTV 1/2 skid (I like this skid for its full coverage up high on the front and rear)
-CA Tech rear radius rods
-CA Tech shift gate
-new prop shaft (I have one with welded caps already sitting in the shed as a spare)
-Simpson harnesses
-lower aarms (undecided on brand)
-beadlocks and 32 or bigger tires
-probably a winch
-Full Cage (undecided which brand but I need 3)
-front ball joints (undecided which brand)

There is a little tick that I can hear start to sound after it has warmed up a little. If it ends up being a problem then I will rebuild it.

View attachment 383917View attachment 383918View attachment 383919View attachment 383920View attachment 383921View attachment 383922

Holy cow! Them are some @hondabob miles!

 

[Hometeam]

That's a good deal, even with 35k on it. I need to find me one of those deals, I'd like to pickup a 2 seat R sometime.

I let you know if I come across anything.....I am always looking around, that's what my wife says is one of my many problems!! 🤣

 

[SuperATV]

@SuperATV Can you tell me if your Atlas front aarms come with the Honda bushings installed?

They don't. You can reuse your stock bushings or go with the aftermarket.

 

[Hometeam]

They don't. You can reuse your stock bushings or go with the aftermarket.

Should I go with the Atlas over your regular ones? What would you suggest? I was thinking about getting ball joints also.

 

[SuperATV]

The Atlas are the top of the line. You'll be impressed for sure!

 

[Hometeam]

I think I might have found what was causing the ticking and running problem. We pulled the timing chain tensioner bolt and messed with the screw and the noises would stop while pressure was applied to the screw. It would purr and clean up right away. I have ordered a new tensioner and will see what it does.

 

[Hometeam]

I replaced the timing chain tensioner last night and it purred like a kitten for 10 minutes. I think she is ready for a beat down!! Gotta finish the rest of the parts and she will be good to go!