Talon turn signals

[Code54]

Seeing WV has passed the laws allowing me to register and plate my Talon I need to add turn signals (I already have the other stuff).
Any suggestions on a nice set or a plug and play that works good?
Thanks

 

[Admin]

 

[ProudDadOf5]

Seeing WV has passed the laws allowing me to register and plate my Talon I need to add turn signals (I already have the other stuff).
Any suggestions on a nice set or a plug and play that works good?
Thanks

He dude, I must have totally missed this news flash!! 😳Hope all is well with you & the fam. Any word bout the P1K5 being street legal buddy? 🍻

 

[Code54]

All is well - we still need to get a WV ride together after all the COVID stuff passes.
Here is a link for everyone to the new law:

West Virginia SB690 | 2020 | Regular Session

Bill Text (2020-04-14) Permitting street-legal special purpose vehicles on highways [Chapter 217, Acts, Regular Session, 2020]

legiscan.com

 

[ProudDadOf5]

All is well - we still need to get a WV ride together after all the COVID stuff passes.
Here is a link for everyone to the new law:

West Virginia SB690 | 2020 | Regular Session

Bill Text (2020-04-14) Permitting street-legal special purpose vehicles on highways [Chapter 217, Acts, Regular Session, 2020]

legiscan.com

We’ve been hittin the outlaws hard. Went to old carbide camp 2 weekends ago. Put bout 80 miles on the 🕷in one day. Queen shoals area, I’m sure you know where I’m talkin bout. As soon as this is over or the next time we go I will hit you up & see if you wanna ride. 🤘🏼

 

[CID]

Ryco has a nice turn signal/horn/license plate light kit for @$300 that's all plug and play. It uses the stock brake lights and adds front turn signals + running lights. The instructions call for all 3 front bulbs facing forward but several of us put one on the side for better visibility.

 

[HUCK]

XTC HAS AN AWESOME PLUG & PLAY TURN SIGNAL SET UP

 

[CID]

To add - the only clunky part of the Ryco kit is the turn signal stalk. It's probably what's available off the shelf and used in many applications. It hangs below the steering wheel but it's never been in my way, it's in the same position as my vehicles, so intuitive. It also contains the 4 way flashers and the horn button is on the end of the stalk. If you don't mind your signals and horn being switches in the dash, those are also available.

 

[Code54]

We’ve been hittin the outlaws hard. Went to old carbide camp 2 weekends ago. Put bout 80 miles on the 🕷in one day. Queen shoals area, I’m sure you know where I’m talkin bout. As soon as this is over or the next time we go I will hit you up & see if you wanna ride. 🤘🏼

View attachment 205706

View attachment 205705

View attachment 205704

Sounds like a plan!!! Thanks

 

[Code54]

I am going to check out the kits you all mentioned. Thanks for the info!

 

[Code54]

Found a set on Ebay for $40 with switches, signals, relay, pretty much just add wire. I should have it this - I will post a follow up, hopefully decent.

 

[Sheetmetalfab]

Found a set on Ebay for $40 with switches, signals, relay, pretty much just add wire. I should have it this - I will post a follow up, hopefully decent.

Link?

 

[Code54]

Toggle Switch Universal Turn Signal Street Legal Led Light Kit for SXS ATV UTV | eBay

MCS UTV Toggle switch turn signal kit with hardware - 8 Round LEDs. On/off/On Toggle switch (left/right). Left/off/Right toggle switch (1/2" mounting hole). Universal DIY turn signal kit. Looking for a simple turn signal kit at a great price?.

www.ebay.com

 

[Tlustre]

this is the kit that i used. just be aware that you will need additional wires, butt connectors, etc. the wires supplied with the kits are not really long enough, especially if you have a 4 seater.

Honda Talon Turn Signals Kit, 1000 1000R 1000X, 1000X-4 Fox Live Value

Honda Talon turn signals, 1000, 1000R, 1000X, 1000X-4 Fox Live Value, street legal kit, D.O.T. approved LED lights, side-by-side UTV.

www.ezturnsignalkits.com

 

[Montecresto]

Found a set on Ebay for $40 with switches, signals, relay, pretty much just add wire. I should have it this - I will post a follow up, hopefully decent.

Have a link for those?

 

[Sheetmetalfab]

Toggle Switch Universal Turn Signal Street Legal Led Light Kit for SXS ATV UTV | eBay

MCS UTV Toggle switch turn signal kit with hardware - 8 Round LEDs. On/off/On Toggle switch (left/right). Left/off/Right toggle switch (1/2" mounting hole). Universal DIY turn signal kit. Looking for a simple turn signal kit at a great price?.

www.ebay.com

@Montecresto ^^^^

 

[Montecresto]

Toggle Switch Universal Turn Signal Street Legal Led Light Kit for SXS ATV UTV | eBay

MCS UTV Toggle switch turn signal kit with hardware - 8 Round LEDs. On/off/On Toggle switch (left/right). Left/off/Right toggle switch (1/2" mounting hole). Universal DIY turn signal kit. Looking for a simple turn signal kit at a great price?.

www.ebay.com

Do you know if this kit is long enough for the X4 and includes a trailer plug...?

Edit, never mind, I see that we use our own wire and cut to length. Thanks

 

[Code54]

Started wiring mine in, simple so far. Made some mounts for the rear signals so they are out of the way yet visible from the rear. I will have about 60 bucks in it when done so not bad price wise and everything is looking good for a nice clean install. I snap some photos when I get done.
Now, where do I put the license plate and light.....

 

[CID]

My plate frame fit like it was supposed to belong there, on the stock plastic exhaust cover. I don't have a plate yet so no photo, still in the box but drilled and ready for installation.

 

[Montecresto]

My plate frame fit like it was supposed to belong there, on the stock plastic exhaust cover. I don't have a plate yet so no photo, still in the box but drilled and ready for installation.

Do you have the lighted plate frame? Wondering if the heat will have effect in the wire and light...

 

[CID]

Do you have the lighted plate frame? Wondering if the heat will have effect in the wire and light...

I don't think it will, the exhaust cover is plastic after all. The wiring is anyone's guess but the plastic insulation lives lying against motors in other vehicles so I think it will be OK. @Lil_Steve has his plate mounted in the same place I plan on using, maybe he'll let us know if the wiring is holding up. 🤔