P1000 Steering wheel

[mjn]

And once you cut that section off the bottom, it fits perfect. 350mm wheel with almost no dish.

 

[Admin]

 

[mjn]

Ok awesome. So that’s the more expensive NRG hub. Might have discontinued the cheaper one or not on eBay anymore. I’ll keep looking a bit then update post

I just looked. It was 90 bucks on eBay.

However, right now it says “unavailable”....

 

[CumminsPusher]

I just looked. It was 90 bucks on eBay.

However, right now it says “unavailable”....

I found an available one. Readjusted post. Will still be on the lookout for the cheaper hub, frustrating

 

[BearWoods]

Steering Wheel Short Hub Adapter For Acura Honda Civic Accord 127251B 7251B New | eBay

This is the short hub adapter I ordered from the original post, it's still listed.... so this is the wrong part I assume? says 97-01 prelude

 

[Neohio]

Steering Wheel Short Hub Adapter For Acura Honda Civic Accord 127251B 7251B New | eBay

This is the short hub adapter I ordered from the original post, it's still listed.... so this is the wrong part I assume? says 97-01 prelude

From my own research and purchases. You need the 92-96 era hub. I purchased that piece and it was wrong.

 

[CumminsPusher]

Steering Wheel Short Hub Adapter For Acura Honda Civic Accord 127251B 7251B New | eBay

This is the short hub adapter I ordered from the original post, it's still listed.... so this is the wrong part I assume? says 97-01 prelude

Sorry bearwoods but probably. It seems the listings were very optimistic about the models that hub actually fit. I changed the original post to a known fitting part (it’s the second item that’s discrepancy) unfortunately it’s a little more. Still trying to find a more reasonable hub

 

[Cuoutdoors]

Steering Wheel Short Hub Adapter For Acura Honda Civic Accord 127251B 7251B New | eBay

This is the short hub adapter I ordered from the original post, it's still listed.... so this is the wrong part I assume? says 97-01 prelude

Yea I think you'll find the hole is too big.

Sent from my SM-G960U using Tapatalk

 

[Cuoutdoors]

And once you cut that section off the bottom, it fits perfect. 350mm wheel with almost no dish.View attachment 100778View attachment 100779

What's the measurement from the paddle to back side of the steering wheel?

Sent from my SM-G960U using Tapatalk

 

[Tigermark]

Which hub shall it be????

 

[CumminsPusher]

View attachment 100819

Which hub shall it be????

Srk110h.

 

[Tigermark]

Srk110h.

Ordered.

 

[CumminsPusher]

Ordered.

Sorry about the price difference but it’ll work

 

[mjn]

What's the measurement from the paddle to back side of the steering wheel?

Sent from my SM-G960U using Tapatalk

Crap... I should've looked at the forum before I left for work.

I'll measure it tonight (if I remember, that is..) but it feels just about the same as the OE wheel did.

 

[CumminsPusher]

What's the measurement from the paddle to back side of the steering wheel?

Sent from my SM-G960U using Tapatalk

1 7/16 from paddle face to back edge of the wheel

 

[Cuoutdoors]

1 7/16 from paddle face to back edge
View attachment 100856

I think factory is about 2 3/4"..... anyone want to check.......

Sent from my SM-G960U using Tapatalk

 

[CumminsPusher]

I think factory is about 2 3/4"..... anyone want to check.......

Sent from my SM-G960U using Tapatalk

I don’t think so. When I did mine I tried keeping it close for comfort

 

[Neohio]

I'll measure this evening.

 

[Neohio]

Looks like roughly 2" or 50mm.

 

[JTW]

View attachment 100875

Looks like roughly 2" or 50mm.

Get that f***ing metric s*** out of here!!

 

[Neohio]

Get that f***ing metric s*** out of here!!

Heywood Jablowme.