P1000 Steering wheel

CumminsPusher

CumminsPusher

Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
Oct 14, 2015
42,064
322,690
113
Washington/Idaho
Ownership

  1. Other Brand

  2. 1000-5

  3. Talon X LV
3E263B27 647E 48B1 92CD 1A14CB6B9921

Pick your 6 bolt wheel. 350mm is very close to factory. 320 works good too but paddles stick out a little. We were 50/50 with what we liked better. I’m going back to the 350 but there’s less choices.
Btw I’m nearly positive this setup will work on Talon and probably would on 500 and 700 as well. If someone tries it report back if you would.

JDM 6 Hole Steering Wheel Hub Adaptor Racing Kit for 92-96 Honda Prelude BB2 | eBay

NRG STEERING WHEEL SHORT HUB ADAPTER 92-95 CIVIC PRELUDE INTEGRA ACCORD SRK-110H | eBay

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/222578620664

REVISED.CHEAPER SHORT HUB ADAPTER CANT SEEM TO BE FOUND ANYMORE. THIS IS SLIGHTLY MORE MONEY BUT WILL WORK AS ADVERTISED.
 
Last edited:
Montecresto

Montecresto

Montecresto el segundo
Lifetime Member
Supporting Member
Club Contributor
Jan 17, 2016
22,584
34,172
113
Eastern oklahoma
Ownership

  1. Other Brand

  2. 500

  3. 1000-3

  4. 1000-5

  5. Talon X4
View attachment 96574

I believe this is correct list I will check exacts tomorrow, it’s late
Pick your 6 bolt wheel. 350mm is very close to factory. 320 works good too but paddles stick out a little. We were 50/50 with what we liked better. I’m going back to the 350 but there’s less choices.


JDM 6 Hole Steering Wheel Hub Adaptor Racing Kit for 92-96 Honda Prelude BB2 | eBay

Steering Wheel Short Hub Adapter Billet For Honda Civic Accord Acura | eBay

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/222578620664
That’s cool, can the horn actually be connected to work with a UTV horn? Are both adapters and spacer that you linked to required for this?
 
CumminsPusher

CumminsPusher

Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
Oct 14, 2015
42,064
322,690
113
Washington/Idaho
Ownership

  1. Other Brand

  2. 1000-5

  3. Talon X LV
That’s cool, can the horn actually be connected to work with a UTV horn? Are both adapters and spacer that you linked to required for this?
It can be but takes a little work
 
  • Like
Reactions: sharp
CumminsPusher

CumminsPusher

Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
Oct 14, 2015
42,064
322,690
113
Washington/Idaho
Ownership

  1. Other Brand

  2. 1000-5

  3. Talon X LV
Thanks I got it all in my cart. Let me know if anything is missing and then all order it. Thanks for the help.

Sent from my SM-G960U using Tapatalk
Everything looks good. The first item in that list you’ll use only the black boot off of that hub assembly so if you find a steering wheel combo cheaper that has that hub you don’t need to but that part separately. Obviously hub fitment doesn’t matter since you’re only using the boot.
The horn button is fairly universal so can find a Honda one or Momo etc. there are various colors of each so whatever there but I just picked out reasonably priced black.
 
  • Like
Reactions: sharp
CumminsPusher

CumminsPusher

Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
Oct 14, 2015
42,064
322,690
113
Washington/Idaho
Ownership

  1. Other Brand

  2. 1000-5

  3. Talon X LV
@CumminsPusher Did you post a link to the spacer ring?

You’ll need the spacer ring to make room for the horn button.
I did this time thanks for reminding me:)
 
  • Like
Reactions: sharp
Neohio

Neohio

Beast of the East
Lifetime Member
Supporting Member
Club Contributor
Dec 22, 2016
14,588
73,848
113
Painesville Ohio
Ownership

  1. 1000-5
In the original PJ thread, You ground down a piece from one adapter. Not sure if that needs to be done with the current selection you have linked.
 
advertisement
CumminsPusher

CumminsPusher

Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
Oct 14, 2015
42,064
322,690
113
Washington/Idaho
Ownership

  1. Other Brand

  2. 1000-5

  3. Talon X LV
In the original PJ thread, You ground down a piece from one adapter. Not sure if that needs to be done with the current selection you have linked.
It does but it’s simple. Pics below. With this parts list nothing on the pioneer needs to be modified.
64E72EDB BB3B 4324 81DF D9CFBD8FED6F

AD50890E FDF2 4C10 9A7A BCE5C0966CB5
 
CumminsPusher

CumminsPusher

Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
Oct 14, 2015
42,064
322,690
113
Washington/Idaho
Ownership

  1. Other Brand

  2. 1000-5

  3. Talon X LV
I didn't want someone to get caught is all.
Thanks for the pics!
That’s a good call. I wish could find one reasonable that doesn’t need ground. If someone needed I’d have no problem throwing a quick grind and sending it back out.
 
  • Like
Reactions: sharp and seig
advertisement

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!