P1000m5 Remi’s Stroker 30 Build And Other Cool Bs!

[Remington]

Sounds GREAT ........ except during hunting season.

So Ture!

 

[Admin]

 

[Remington]

Sounds GREAT ........ except during hunting season.

Actually...it’s not that bad. The video dosnt do it justice. As long as your not opening it up you should be ok. Not much different than stock. (In the idle and low rpm that is) The mice noise from the Tranny I would be more worried about when I hunt. But then again, I don’t use my P1K5 to go to my bind. I walk out to my blind. It’s a little bit of a trip but the quieter the better right? I guess it would depend if you do use it to get to your hunting spot? Now, if you had the HMF Titan not the QS like I have, I definitely wouldn’t use it hunting! That would be like making a grand entrance and leting all know you have arrived lol.

 

[BigOL3]

Actually...it’s not that bad. The video dosnt do it justice. As long as your not opening it up you should be ok. Not much different than stock. (In the idle and low rpm that is) The mice noise from the Tranny I would be more worried about when I hunt. But then again, I don’t use my P1K5 to go to my bind. I walk out to my blind. It’s a little bit of a trip but the quieter the better right? I guess it would depend if you do use it to get to your hunting spot? Now, if you had the HMF Titan not the QS like I have, I definitely wouldn’t use it hunting! That would be like making a grand entrance and leting all know you have arrived lol.

No, I never drive to my stand, but how close I may get will vary according to the lay of the land, but usually about 1/4 mile.

 

[Remington]

Here’s some green eyes I added to big brother. Fitting with the snake on the hood.

 

[BWAF]

View attachment 81197 Here’s some green eyes I added to big brother. Fitting with the snake on the hood.

That's looks pretty cool

Sent from my SM-G930U using Tapatalk

 

[Delton]

View attachment 81197 Here’s some green eyes I added to big brother. Fitting with the snake on the hood.

I like it!!

 

[Remington]

That's looks pretty cool

Sent from my SM-G930U using Tapatalk

I like it!!

I put them on my P5 in yellow and thought the green would look cool.

 

[JEP]

I was just looking at your Bumble Bee build today. The pic of it in the rear view mirror is my favorite.

 

[Remington]

So I put a 2-1/2” lift on my machine. I got it from a a guy that’s not in this forum much at all that I bought my bed liner from. He has a buddy that made this as a prototype and used his machine as a Guinea pig. He had it for a short time and has stock shocks witch made the ride rough, he also just uses the pioneer as a working machine. So he decided to take it off and asked if I was interested in it? I didn’t say no! Lol. It’s much light the high lifter but the front is a 1 pice bracket and so is the rear
(2 brackets) so no need for the spacer tubes through your bolts. Machine and welded nicely and black powder coated. From what I heard, there trying to get it to production. Anyway, I like it so far. I’ve noticed that it took my factory toe out in the rear back to normal. The first pic is before the lift just for comparison.

 

[Rambo]

So I put a 2-1/2” lift on my machine. I got it from a a guy that’s not in this forum much at all that I bought my bed liner from. He has a buddy that made this as a prototype and used his machine as a Guinea pig. He had it for a short time and has stock shocks witch made the ride rough, he also just uses the pioneer as a working machine. So he decided to take it off and asked if I was interested in it? I didn’t say no! Lol. It’s much light the high lifter but the front is a 1 pice bracket and so is the rear
(2 brackets) so no need for the spacer tubes through your bolts. Machine and welded nicely and black powder coated. From what I heard, there trying to get it to production. Anyway, I like it so far. I’ve noticed that it took my factory toe out in the rear back to normal. The first pic is before the lift just for comparison.View attachment 85008 View attachment 85009 View attachment 85010 View attachment 85011

Looks awesome!

 

[Remington]

Looks awesome!

Thanks! I think so to. I’ll have it all next week at the cabin then I’ll see if I really like it. Drove it around the yard and front ditch and it was nice. Might have to do some re adjustments to the pre load. There set for the way I had it for stock. But they went on real nice and easy. Will see.

 

[tr005]

Thanks! I think so to. I’ll have it all next week at the cabin then I’ll see if I really like it. Drove it around the yard and front ditch and it was nice. Might have to do some re adjustments to the pre load. There set for the way I had it for stock. But they went on real nice and easy. Will see.

Looking good Rem. Enjoy the cabin next week.

 

[Remington]

Looking good Rem. Enjoy the cabin next week.

We will. We’ll be there on the 2nd through the 8th. Come on by and ride.

 

[tr005]

We will. We’ll be there on the 2nd through the 8th. Come on by and ride.

Might just take you up on that. Will let you know.

 

[trigger]

Looks like you might be able to fit bigger tires on it now?

 

[Remington]

Looks like you might be able to fit bigger tires on it now?

Perhaps? Hahahaha

 

[Windrock1000]

So I put a 2-1/2” lift on my machine. I got it from a a guy that’s not in this forum much at all that I bought my bed liner from. He has a buddy that made this as a prototype and used his machine as a Guinea pig. He had it for a short time and has stock shocks witch made the ride rough, he also just uses the pioneer as a working machine. So he decided to take it off and asked if I was interested in it? I didn’t say no! Lol. It’s much light the high lifter but the front is a 1 pice bracket and so is the rear
(2 brackets) so no need for the spacer tubes through your bolts. Machine and welded nicely and black powder coated. From what I heard, there trying to get it to production. Anyway, I like it so far. I’ve noticed that it took my factory toe out in the rear back to normal. The first pic is before the lift just for comparison.View attachment 85008 View attachment 85009 View attachment 85010 View attachment 85011

Where did you find the eyes?

 

[Remington]

Where did you find the eyes?

Actually @trigger had them on his P5 when I first met him on a ride. He has since changed them on his (he does that cuz he get board) lol. I had completely forgot about them and about a few years later came across them on eBay and I ordered a set. You have to cut them to fit .They definitely look cool, there like a tented mesh. The only issue I have with them is that your lights aren’t nearly a bright when there on especially when you get dirty water or mud on them so you want to have another set of lights to rely on like most of us do.
2014-17 Honda HONDA PIONEER 700 GREEN EYE'S Head light Cover's | eBay

 

[Windrock1000]

Actually @trigger had them on his P5 when I first met him on a ride. He has since changed them on his (he does that cuz he get board) lol. I had completely forgot about them and about a few years later came across them on eBay and I ordered a set. You have to cut them to fit .They definitely look cool, there like a tented mesh. The only issue I have with them is that your lights aren’t nearly a bright when there on especially when you get dirty water or mud on them so you want to have another set of lights to rely on like most of us do.
2014-17 Honda HONDA PIONEER 700 GREEN EYE'S Head light Cover's | eBay

Thank you sir! Never use factory lights anymore.

 

[Remington]

Thank you sir! Never use factory lights anymore.

Your quite welcome.