P1000 Rear hub bushings

[RobbyBerning]

I have a 2018 1000-5 when I bought it it had 6 in portals with 6 in arms I've took off the portals and I would like to replace the bushings. What is everyone's preference? Thanks

 

[Admin]

 

[Hello_Darkness]

I have a 2018 1000-5 when I bought it it had 6 in portals with 6 in arms I've took off the portals and I would like to replace the bushings. What is everyone's preference? Thanks

Are you replacing the bushings in the knuckles or the a-arms.

I dont know of anyone making knuckle bushings besides Honda.

If your talking about arm bushings, it depends on the manufacturer of those arms.

 

[RobbyBerning]

Knuckle. I've been seeing the garage products just wondering

 

[TripleB]

Knuckle. I've been seeing the garage products just wondering

I just ordered the garage product bushings last week. I've replaced the knuckle bushings at least 3 times in 7 years. Maybe 4 times. I figured i would give the garage product a go. I use his bushings in my supperatv a-arms and get about 3 or 4 times the miles out of them than the supperatv bushings. And he has warrantied them everytime when they have wore out. I would have bought his knuckle bushings years ago if I knew that he made them.

 

[Ericseabaugh]

I just ordered the garage product bushings last week. I've replaced the knuckle bushings at least 3 times in 7 years. Maybe 4 times. I figured i would give the garage product a go. I use his bushings in my supperatv a-arms and get about 3 or 4 times the miles out of them than the supperatv bushings. And he has warrantied them everytime when they have wore out. I would have bought his knuckle bushings years ago if I knew that he made them.

I put his knuckle bushings in last fall. The dude makes damn good bushings. The SuperATV bushings are just like the rest of their parts, garbage!

 

[ToddACimer]

I thought garage products bushings were no better than Superatv in my front a-arms and when I called about warranty he said it was likely wear related and they needed replacement after 1000 miles. I threw them away and bought RB3 bushings for the a-arms and they have grooves for grease and appear to be much higher quality.

I don't have any suggestions for rear knuckle bushings but I know my machine needs them at nearly 6k miles.