P1000m3 Rear Axle

[YardDog]

Tore the cv boots up pretty bad today ( A Arm guards already ordered. ) The quickest way to get back on the trails is to pop a new cv axle in. I'll replace the boots on the old one and keep it for a spare, someone might need it on a group ride. The one I'm replacing is the rear drivers side. I called the dealer to get a part number but the guy wasn't real sure if Honda references right and left from the drivers seat or standing in front of it. He eventually gave me a part number and said if it's the wrong one I could send it back. I'd rather get it right the first time. So the drivers side rear cv axle assembly, is that considered the right or the left? I have two part numbers RT. 42250-50-HL4-A01 and LT. 42350-HL4-A01 . Ordering online to save about $100 compared to the dealers price and want to make sure I get the right one.

 

[Admin]

 

[Hondasxs]

It's as you sit in the seat. Left vs Right.

I'll check in a few.

Sent from my SM-G955U using Tapatalk

 

[YardDog]

It's as you sit in the seat. Left vs Right.

I'll check in a few.

Sent from my SM-G955U using Tapatalk

Thank you. That's how I reference parts too, but the guy at the dealer didn't have a clue as to how Honda references parts.

 

[Hondasxs]

You do know you will have to still build the axle right? Honda only sales 1/2 shaft kits. Easy is not what you suggest.

If you want easy, you should just get the Rhino.



Sent from my SM-G955U using Tapatalk

 

[Ragnar406]

i Just replaced my inside boot on that axle the other day. It was a lot easier than I thought it was...

 

[YardDog]

You do know you will have to still build the axle right? Honda only sales 1/2 shaft kits. Easy is not what you suggest.[/URL]



Sent from my SM-G955U using Tapatalk

The two brands I was looking at was Rhino and All Balls because they are already assembled. Just pull the old one and pop a new one in.

 

[Ragnar406]

@GlockMeister recently used the all balls boots to replace boots on one of his axles. I used the Honda kit - the bands were a pain and if you buy or have the tools I think the all balls bands are easier.

 

[YardDog]

i Just replaced my inside boot on that axle the other day. It was a lot easier than I thought it was...

I was hoping it was just more time consuming than challenging. This way I'll have a spare in case someone needs it.

 

[Hondasxs]

All balls is a great buy - https://www.amazon.com/All-Balls-Pioneer-42350-HL4-A01-42320-HL4-A01/dp/B07BZRGQGJ/?tag=sxsweb24-20

And standard length Rhino's - https://www.amazon.com/SuperATV-Rhino-Honda-Pioneer-FRONT/dp/B07956HL93/ref=mp_s_a_1_1?ie=UTF8&qid=1538873380&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=honda+pioneer+1000+axle&dpPl=1&dpID=41GaPL7A5-L&ref=plSrch&th=1&psc=1
Sent from my SM-G955U using Tapatalk

 

[Ragnar406]

Hell I'm confused again. From the drivers seat I need the left rear. But the links you provided show a right rear and an undetermined front. Is it right or left that I need? Thanks again.

Here is the left rear https://www.amazon.com/All-Balls-Pioneer-42350-HL4-A01-42320-HL4-A01/dp/B07BZRGQGJ/?tag=sxsweb24-20
All balls

For the rear on the rhino there is a selection box

 

[GlockMeister]

Hell I'm confused again. From the drivers seat I need the left rear. But the links you provided show a right rear and an undetermined front. Is it right or left that I need? Thanks again.

According to rocky mt...the inner and outer all balls are the same front and rear...give me a min ill see if i can find my extras...got everything packed up

 

[gullyjumper]

As you set in the vehicle,left is the drivers side and right is the pasanger side.

 

[GlockMeister]

 

[YardDog]

As you set in the vehicle,left is the drivers side and right is the pasanger side.

That's the only way I have known. But again, the guy at the dealer had no idea and gave me the part number for the right side.

 

[YardDog]

View attachment 89460

Thanks man, now I know what repair kit I need, much appreciated.

 

[YardDog]

Here is the left rear https://www.amazon.com/All-Balls-Pioneer-42350-HL4-A01-42320-HL4-A01/dp/B07BZRGQGJ/?tag=sxsweb24-20
All balls

For the rear on the rhino there is a selection box

Thank you sir, mystery solved lol

 

[GlockMeister]

Thanks man, now I know what repair kit I need, much appreciated.

Get the little band tool and cutter ...itll make the job alot easier

 

[YardDog]

Get the little band tool and cutter ...itll make the job alot easier

Agreed. The band tool is a "gotta have" to do the job right. Costs about $40-$50, but it's worth it when the job is done. Dad always said you can do a good job without the right tools, but it takes a hell of a lot longer, is more aggravation, and making it look right is twice the challenge.

 

[GlockMeister]

Agreed. The band tool is a "gotta have" to do the job right. Costs about $40-$50, but it's worth it when the job is done. Dad always said you can do a good job without the right tools, but it takes a hell of a lot longer, is more aggravation, and making it look right is twice the challenge.

Tusk CV Boot Banding Tool
Tusk CV Boot Band Cutter

 

[Hondasxs]

Hell I'm confused again. From the drivers seat I need the left rear. But the links you provided show a right rear and an undetermined front. Is it right or left that I need? Thanks again.

Lol... trying to help from a phone is sometimes a PITA.. lol.
At computer now and fixing.

Sent from my SM-G955U using Tapatalk