Press suggestions??

[JTW]

I knew you were kinky but ouch! if you want your balls pressed just find a hooker!

That reminds me of another video I have...

 

[Admin]

 

[100Acre]

That reminds me of another video I have...

 

[Remington]

Yes.. but I’m not joking about using a hammer and blocks to beat a bearing in. And I haven’t had great luck with the little C clamp style @Remington mentioned. Maybe it’s just the Indian and not the bow.

They can certainly be a PITA. You have to be patient with that tool especially when pressing a new ball joint in. If your using an impact gun, back off the air pressure a bit so you don’t over press it too fast and cause the anvil to run off the top of the ball joint, binding and destroying it . Last thing Is you have to have a good frame of mind in order to press that correctly. If your stressed, worked up or pissed off you’ll Fvck it up easily. I’ve done that a few times. If it’s not working, just walk away and come back later.

 

[Vikes79]

No.. this is the route I’m leaning

Dake Model 5 Compound Arbor Press

Buy Dake Model 5 Compound Arbor Press from Elite Metal Tools today. Experience the Elite Advantage with Free Shipping and top-notch customer service.

www.elitemetaltools.com

Why so small?

You have a mill already?

600 Ton Dake Hydraulic Traveling Ram Straightening Press | eBay

Stroke: 31". 10" Tie Bars.

www.ebay.com

🤣🤣🤣

 

[JenElio]

Why so small?

Ohh c'mon don't make fun of him

🤣🤣

 

[JTW]

Ohh c'mon don't make fun of him

🤣🤣

But it’s cute!!

 

[JenElio]

 

[JTW]

So I drive an hour to HF and it’s 2 minutes past 5:00 (I’m an hour behind it’s 4:02 my time. The dude tells me they’re closing and I go off, walk back to the car and b**** to my wife. I decide to say f*** it and go in anyway. He sees me and starts to say something. Soooo, I make a scene and fuss. He asks the manager and they say let him in. I run back and get one of the things I need and I’m scurrying around the store trying to find the presses. I finally see it and grab one of the little things. The same guy comes up and asks what he can get for me... I tell him what I’m after and he says, well, if you are mad before you’re going to be real mad at me now. We don’t have any. MOTHER f***ER!!! We kiss and make up and look in the back. Sure enough, they don’t have either the 12 or 20.

 

[DG Rider]

So I drive an hour to HF and it’s 2 minutes past 5:00 (I’m an hour behind it’s 4:02 my time. The dude tells me they’re closing and I go off, walk back to the car and b**** to my wife. I decide to say f*** it and go in anyway. He sees me and starts to say something. Soooo, I make a scene and fuss. He asks the manager and they say let him in. I run back and get one of the things I need and I’m scurrying around the store trying to find the presses. I finally see it and grab one of the little things. The same guy comes up and asks what he can get for me... I tell him what I’m after and he says, well, if you are mad before you’re going to be real mad at me now. We don’t have any. MOTHER f***ER!!! We kiss and make up and look in the back. Sure enough, they don’t have either the 12 or 20.

Did you try having sex with him?

 

[Todd627]

Did you try having sex with him?

Hello...he said “kiss and make up”....duh 😜

 

[70Bones]

That reminds me of another video I have...

Home made???

 

[JTW]

Home made???

Wouldn’t you like to know... I’ll send it to you!

 

[70Bones]

Wouldn’t you like to know... I’ll send it to you!

No thanks, you sent me a pic of your goods after you had your nuts removed, took me a month of counselling to get over that!!!

 

[DG Rider]

Hello...he said “kiss and make up”....duh 😜

He never kisses me. 🤔

 

[Smitty335]

He never kisses me. 🤔

Better be glad, Have you seen @Kilow lately? HA!

 

[Vikes79]

 

[JTW]

View attachment 200008

 

[Rapman]

Need to press some ball joints and tired of the hassle. Any suggestions on a press? Good, bad... looking at the HF because I can get it quick.

12 ton H-Frame Industrial Heavy Duty Floor Shop Press

20 Ton H-Frame Floor Shop Press

Amazing deals on this 20Ton H-Frame Shop Press at Harbor Freight. Quality tools & low prices.

www.harborfreight.com

If you only need to do a couple, and you are not doing this on a regular or business basis, simply use your vise. I have done quite a few with mine and
did it very easily and had no need for a press.

 

[Mitch89445]

I have a 12 ton it works for my needs and isnt a budget killer most local parts stores probably sell one.