P500 Pioneer 1st Armored Division

[Chooglin]

Just ordered the EZ Steer power steering from SuperATV, $559 with the discount...cha ching!
Btw, the discount code is RZRFORUM for anything under $400 and RZRFORUM1 for anything over $400.

Congrats..........I knew you would buy it sooner or later.

No interest in the new W.E. shocks ?

 

[Admin]

 

[trigger]

Congrats..........I knew you would buy it sooner or later.

No interest in the new W.E. shocks ?

Yeah, you always ask yourself after 'did I really need it'? Cranking on that wheel a couple weeks ago to turn around on a tight trail, I kinda decided then. I do have interest in those shocks, just don't want to be the first to try them. That's a lot of coin too!
I either have to get over adding sh** to this machine or start digging real deep.

 

[Remington]

Yeah, you always ask yourself after 'did I really need it'? Cranking on that wheel a couple weeks ago to turn around on a tight trail, I kinda decided then. I do have interest in those shocks, just don't want to be the first to try them. That's a lot of coin too!
I either have to get over adding sh** to this machine or start digging real deep.

Yup they are steep! I have a hard time spending that for shocks on my P1K5.

 

[trigger]

Yup they are steep! I have a hard time spending that for shocks on my P1K5.

I read where someone spent $1300 for shocks for a P1k...screw that!

 

[SILVER_ALERT]

Yeah, you always ask yourself after 'did I really need it'? Cranking on that wheel a couple weeks ago to turn around on a tight trail, I kinda decided then. I do have interest in those shocks, just don't want to be the first to try them. That's a lot of coin too!
I either have to get over adding sh** to this machine or start digging real deep.

Hey Trigger, you don't have to worry about what it costs........... you have a TANK!

 

[trigger]

Hey Trigger, you don't have to worry about what it costs........... you have a TANK!

View attachment 51236

Lmao, at this point the tank may have been cheaper!

 

[Chooglin]

I know how you feel , it's rediculous the amount of money you can put into one of these things.........you have to admit though , it is fun to mod/accessorize them!

 

[Remington]

I read where someone spent $1300 for shocks for a P1k...screw that!

No shat! I've tried to bring myself to doing it , that's when the old lady gives me the stink eye!

 

[trigger]

I know how you feel , it's rediculous the amount of money you can put into one of these things.........you have to admit though , it is fun to mod/accessorize them!

I'm addicted to accessorizing this thing, that's my dilemma now, running out of stuff to do to it. I've said that I was done a few times but...pretty quick here, I really will be.

 

[trigger]

Tracking says that the EZ Steer and the Pro Armor harnesses should both be here tomorrow. Don't think I'll mess with the power steering until Sunday but wouldn't mind having those harnesses in for Saturday in St Helen. Hoping I can come up with an easy install idea once I get them.

 

[Remington]

Tracking says that the EZ Steer and the Pro Armor harnesses should both be here tomorrow. Don't think I'll mess with the power steering until Sunday but wouldn't mind having those harnesses in for Saturday in St Helen. Hoping I can come up with an easy install idea once I get them.

Too bad I don't live closer! You and I could knock that sucker out before Saturday for sure!

 

[trigger]

Too bad I don't live closer! You and I could knock that sucker out before Saturday for sure!

Thanks Remmy! I saw Jackals post and what he did, looks like he fabbed something for the shoulder straps to bolt to. I have an idea of what I want to do but have to have those brackets in hand to be sure. Either way, both will be on for the bridge ride.

 

[Remington]

Thanks Remmy! I saw Jackals post and what he did, looks like he fabbed something for the shoulder straps to bolt to. I have an idea of what I want to do but have to have those brackets in hand to be sure. Either way, both will be on for the bridge ride.

Sounds like a plan! Let me know if you need anything like a small welder to borrow, I can bring it Saturday.

 

[trigger]

Harnesses are installed.

Power steering going in on Sunday.

 

[Remington]

Harnesses are installed.
View attachment 51613 View attachment 51614 Power steering going in on Sunday.

Sweet man! Now our rigs really look like brothers! We ride in the morning! Saddle up Regulators

 

[trigger]

Got the power steering all bolted up today. Routed the wires to the back and made it inside the toolbox but not to the power block, I'll have to add on. The photos that they send along in the instructions are wrong, show the motor upside down. Can't wait to power it up and check it out though.
Went for the first ride yesterday with the harnesses, and they definitely work. They keep you from leaning forward to reach things, like the e brake lever. Found myself riding with only the lapbelt most of the time. I did climb a pretty good hill though and was glad I had it on then, strapped in tight.
Speaking of climbing that hill...it was fairly steep and all sand and had a turn at the top between two trees. Saw a P1 that didn't make it up a couple months ago, mainly due to the trees, and another P5 tried a couple of times before me.
Old Ironsides, like a trusty horse, kicked and clawed its way up and over! Unbelievable! This machine has never failed at anything I've asked of it and exceeds my expectations all the time. I can't see ever parting with this rig.

P.S. That P1 blew up it several times no problem after I made it, lol!

 

[Remington]

Got the power steering all bolted up today. Routed the wires to the back and made it inside the toolbox but not to the power block, I'll have to add on. The photos that they send along in the instructions are wrong, show the motor upside down. Can't wait to power it up and check it out though.
Went for the first ride yesterday with the harnesses, and they definitely work. They keep you from leaning forward to reach things, like the e brake lever. Found myself riding with only the lapbelt most of the time. I did climb a pretty good hill though and was glad I had it on then, strapped in tight.
Speaking of climbing that hill...it was fairly steep and all sand and had a turn at the top between two trees. Saw a P1 that didn't make it up a couple months ago, mainly due to the trees, and another P5 tried a couple of times before me.
Old Ironsides, like a trusty horse, kicked and clawed its way up and over! Unbelievable! This machine has never failed at anything I've asked of it and exceeds my expectations all the time. I can't see ever parting with this rig.

P.S. That P1 blew up it several times no problem after I made it, lol!

View attachment 51743 View attachment 51744

Thanks for the props there buddy! Sorry I hit the wrong button when recording your hill run. Pissed me off!!!! Will get her next time.

 

[trigger]

Stole this pic from Piston's thread...
I appreciate you guys getting this one, thanks!

 

[Deleted member 3748]

Got the power steering all bolted up today. Routed the wires to the back and made it inside the toolbox but not to the power block, I'll have to add on. The photos that they send along in the instructions are wrong, show the motor upside down. Can't wait to power it up and check it out though.
Went for the first ride yesterday with the harnesses, and they definitely work. They keep you from leaning forward to reach things, like the e brake lever. Found myself riding with only the lapbelt most of the time. I did climb a pretty good hill though and was glad I had it on then, strapped in tight.
Speaking of climbing that hill...it was fairly steep and all sand and had a turn at the top between two trees. Saw a P1 that didn't make it up a couple months ago, mainly due to the trees, and another P5 tried a couple of times before me.
Old Ironsides, like a trusty horse, kicked and clawed its way up and over! Unbelievable! This machine has never failed at anything I've asked of it and exceeds my expectations all the time. I can't see ever parting with this rig.

P.S. That P1 blew up it several times no problem after I made it, lol!

View attachment 51743 View attachment 51744

That unit is a lot smaller than I was imagining. No installation hammer needed?

 

[Deleted member 3748]

Don't tell @trigger , but I sat in Old Ironsides.