P1000 Overhead Lights for P1K5

[Spoonbill]

I put just two led rock lights in. One is on a rocker for the over head. The other is wired into the headlights to come on to light up the floor board. Very simple install used power coming off the cig/acc outlet to power the overhead since its only one rocklight its not pulling much.

View attachment 252742 View attachment 252743 View attachment 252744

Can you advise the supplier of these lights??

 

[Admin]

 

[rubyred16]

They are from amazon here is the link. I have clear ones as my backups and they work very well.

https://www.amazon.com/gp/product/B08B8XXBLH/?tag=sxsweb24-20

 

[Spoonbill]

They are from amazon here is the link. I have clear ones as my backups and they work very well.

https://www.amazon.com/gp/product/B08B8XXBLH/?tag=sxsweb24-20

Thanks, Rubyred. Now, I’ll be bothering you for wiring advice!

 

[rubyred16]

No problem glad to help!

 

[Spoonbill]

I ordered the lights but the mounting hardware to attaché the curved backing are too long and would require me drilling holes in the ROPS. How did you mount yours ?? Sorry to drag this out.

 

[rubyred16]

I ordered the lights but the mounting hardware to attaché the curved backing are too long and would require me drilling holes in the ROPS. How did you mount yours ?? Sorry to drag this o

No problem I just used small headed self tapping screws into the rops. You could try some zipties if you don't want the holes.

 

[Spoonbill]

I use rock lights for the cab. I have 2 on front, middle and rear bar. I used white and its brighter than what you want but you can get any color and use the number of rock lights that you think will give you enough light.

Good morning, How did you mount these on the ROPS without compromising its integrity??

 

[TripleB]

Good morning, How did you mount these on the ROPS without compromising its integrity??

I used self tapping screws. You could also use rivet nuts and the screws that come with the lights. Or just use cable ties if you want.

 

[caverat]

You can just get Amazon and buy led tape light has 3m tape on the back side I use this stuff for all kinds of things in all kinds of environments works great and is cheep. You can cut it to fit if hooking it to a 12 vdc system you dont need anything else if hooking it to a 120 vac system you need to buy a driver.

 

[TripleB]

You can just get Amazon and buy led tape light has 3m tape on the back side I use this stuff for all kinds of things in all kinds of environments works great and is cheep

Even better idea.

 

[Seadonist]

Baja Designs LED Dome Light w/Switch (Green)

UTV Source carries the best UTV parts and accessory brands in the industry. All the best parts for Polaris RZR, Can-Am Maverick X3, Yamaha YXZ, and more.

www.utvsource.com

Sent from my iPhone using Tapatalk

 

[Spoonbill]

Baja Designs LED Dome Light w/Switch (Green)

UTV Source carries the best UTV parts and accessory brands in the industry. All the best parts for Polaris RZR, Can-Am Maverick X3, Yamaha YXZ, and more.

www.utvsource.com

Sent from my iPhone using Tapatalk

Mucho Gracias! I thing this might me the best solution yet as I don’t have to deal with yet another switch on the dash

 

[Seadonist]

Mucho Gracias! I thing this might me the best solution yet as I don’t have to deal with yet another switch on the dash

Won’t break the bank either. Post some pics once you get it mounted please


Sent from my iPhone using Tapatalk

 

[Spoonbill]

Won’t break the bank either. Post some pics once you get it mounted please


Sent from my iPhone using Tapatalk

Will do.
Hopefully receive it early this week as my bride is very happy about me turning this electrical upgrade project into a Honda Custom Shop while her 4-Runner sets outside

 

[Lady01]

Will do.
Hopefully receive it early this week as my bride is very happy about me turning this electrical upgrade project into a Honda Custom Shop while her 4-Runner sets outside

Thats funny! My Bride said the same thing!!