P500 Noisy transmission (rear end?)

[Moark Willy]

I couldn't find this addressed anywhere on the forum so here goes.
As I use the 520 more and more the shifting has slowly started to become a bit less harsh.
Today I took it up the road around the neighborhood since it was such a nice day here (80°)
Once the 520 gets up to speed and it is "freewheeling" it gets noisy, like the gears aren't meshed tightly.
It is most noticeable when you let off the accelerator or going downhill on a gradual slope
Usually my uses are around the property rather than on the road so the noise isn't there.
Anyone else notice this issue?

 

[Admin]

 

[futzin]

normal

 

[Moark Willy]

Thanks for the fast reply....it is a bit unnerving though when it sounds like parts are about to fall off.

 

[futzin]

Thanks for the fast reply....it is a bit unnerving though when it sounds like parts are about to fall off.

I know, but they haven't yet .
The P5 is a tank, just not as tight . . .

 

[Splorin]

Straight cut gears doing straight cut things.

 

[silvertrd09]

Try using a heavier weight oil to quiet it down a bit.

 

[Jerryg]

It's not the belt.

 

[ToyMan]

My old 700 had diff noise too, I disassembled and checked clearances, all normal. Our new 1000 is the same….
This helped the 700:

https://www.amazon.com/Valvoline-SynPower-75W-140-Full-Synthetic/dp/B08KB2XYTP/?tag=sxsweb24-20

 

[Red500]

I don't have much luck with the search either, and I'm not trying to be an ass, but this really has been discussed a lot on this forum and others. Like has been said in short: it is normal.
There are things that help. I think the number one suggestion is to switch to synthetic gear oil. This seems to help, a little, but I think you'll learn to live with it.

 

[Smitty335]

I'm still hung up on normal, there an't normal about people and 500's! HA! Remember the day when I used to aggravate the P5 folks, I had to quit, I was getting death threats! HA!