New Ride 2023 Talon R LV

[Jankyeye]

After searching for a P520 for a few weeks without any luck. I stumbled upon a 2023 Talon 1000R live valve. Wasn't really looking for one but wanted a 2nd machine since most of our rides are just the family and it can be a long walk out some places. I wont claim it was a steal by any means but It was marked down enough to convince me. However since I wasn't looking for a Talon, I'm not even sure where to start having done zero research into the "must haves". I assume skid plates, vent lines, are pretty high on the list. Is the intake pre-filter still needed with the new ones?





And for anyone wondering, it will "JUST" fit on a 7x10 trailer, lol

 

[Admin]

 

[Scrappapotamus]

Nice

 

[JenElio]

After searching for a P520 for a few weeks without any luck. I stumbled upon a 2023 Talon 1000R live valve. Wasn't really looking for one but wanted a 2nd machine since most rides are just the family and it can be a long walk out some places. I wont claim it was a steal by any means but It was marked down enough to convince me. However since I wasn't looking for a Talon, I'm not even sure where to start having done zero research into the "must haves". I assume skid plates, vent lines, are pretty high on the list. Is the intake pre-filter still needed with the new ones?



View attachment 427955 View attachment 427956

And for anyone wondering, it will "JUST" fit on a 7x10 trailer, lol

View attachment 427957 View attachment 427958

Sweeeeeet!!!! Nice buggy 👍

Have you checked out @Coeus' AKA The General's "build thread"? 🙄😂 Although it's a R4 he's got a real nice list of needed/wanted accessories. He'll even show you how to stack'm and pile up the boxes in the garage.......😂

 

[Buggyman]

congrats on the new buggy

 

[scottkooch]

After searching for a P520 for a few weeks without any luck. I stumbled upon a 2023 Talon 1000R live valve. Wasn't really looking for one but wanted a 2nd machine since most of our rides are just the family and it can be a long walk out some places. I wont claim it was a steal by any means but It was marked down enough to convince me. However since I wasn't looking for a Talon, I'm not even sure where to start having done zero research into the "must haves". I assume skid plates, vent lines, are pretty high on the list. Is the intake pre-filter still needed with the new ones?



View attachment 427955 View attachment 427956

And for anyone wondering, it will "JUST" fit on a 7x10 trailer, lol

View attachment 427957 View attachment 427958

As far as the 10-80 pre-filter, yes it is still needed. Some sort of pre-filter or particle separator is needed. Honda has not changed the factor intake location.

 

[Jankyeye]

Took it out for its maiden trip to Ocala National Forest. Rode ~52 miles. Really liked the push button I-4wd. Super simple, push the button and forget about it.

Not sure we moved fast enough to take advantage of the live valve suspension. The washboard areas were still pretty rough until you hit 25 or so. For anyone whose been to Ocala, 25 is pretty sketchy in most of area.

We kept it in low all day and this thing wants to go! It is super easy to do 20-30mph if your not careful. Took turns driving with the wife and she scares the hell out of me, lol

 

[Remington]

I'm not even sure where to start having done zero research into the "must haves". I assume skid plates, vent lines, are pretty high on the list. Is the intake pre-filter still needed with the new ones?

Congrats on the new ride.
Yes you need all of it as a must first thing

 

[Plumber32]

Pre filter, and skids with the x brace for under the engine. I'd also put on the superatv front end stiffner right away.

 

[NTCPrezJB]

After searching for a P520 for a few weeks without any luck. I stumbled upon a 2023 Talon 1000R live valve. Wasn't really looking for one but wanted a 2nd machine since most of our rides are just the family and it can be a long walk out some places. I wont claim it was a steal by any means but It was marked down enough to convince me. However since I wasn't looking for a Talon, I'm not even sure where to start having done zero research into the "must haves". I assume skid plates, vent lines, are pretty high on the list. Is the intake pre-filter still needed with the new ones?



View attachment 427955 View attachment 427956

And for anyone wondering, it will "JUST" fit on a 7x10 trailer, lol

View attachment 427957 View attachment 427958

Nice 👍🏻

 

[TxDoc]

Congratulations
Nice new rig. Thanks for all the photos.

Sent from my motorola edge plus 2023 using Tapatalk

 

[Jankyeye]

Pre filter, and skids with the x brace for under the engine. I'd also put on the superatv front end stiffner right away.

X Brace?

 

[Remington]

X Brace?

Home Page - SuperATV

www.superatv.com

 

[Todd627]

Congrats on the Talon!!

Sweet lookin’ rig 👍🏼

 

[CID]

Check out the New Talon Owners thread -

New Talon Owners - First Things to Know and Check

I'm new to the SxS world - damn, there's a lot to learn, hence this thread - maybe we can make it easier for others new to the Talon and put it in one thread. 1. If you're a motorcyclist, you already know that sometimes your bike won't shift into gear at a stop without rocking the bike back and...

hondasxs.com

 

[Jankyeye]

Home Page - SuperATV

www.superatv.com

Thanks thought maybe they were 2 separate things

 

[Jankyeye]

Check out the New Talon Owners thread -

New Talon Owners - First Things to Know and Check

I'm new to the SxS world - damn, there's a lot to learn, hence this thread - maybe we can make it easier for others new to the Talon and put it in one thread. 1. If you're a motorcyclist, you already know that sometimes your bike won't shift into gear at a stop without rocking the bike back and...

hondasxs.com

Thanks

 

[Remington]

Thanks thought maybe they were 2 separate things

NP
They are cheep considering and good insurance in the long run

 

[Coeus]

Thanks thought maybe they were 2 separate things

I believe they are two separate things, the X brace is part of the Factory UTV skid..

Honda Talon 1000X-4 UHMW Ultimate Skid Package

Protect the underside of your Can-Am Honda Talon 1000X-4 with Factory UTV's UHMW Ultimate Skid Package - The gold standard in UTV Protection.

factoryutv.net

 

[Jankyeye]

I believe they are two separate things, the X brace is part of the Factory UTV skid..

Honda Talon 1000X-4 UHMW Ultimate Skid Package

Protect the underside of your Can-Am Honda Talon 1000X-4 with Factory UTV's UHMW Ultimate Skid Package - The gold standard in UTV Protection.

factoryutv.net

Thanks, Guess it only works with the Factory UTV ultimate package. I don't see it available as a separate item.

 

[SLOWPOKE693]

Pre filter, and skids with the x brace for under the engine. I'd also put on the superatv front end stiffner right away.

This would be my suggestion of first to do's also.