P1000 looking to modify my intake, any recomendations?

[hondarider316]

not sure if I want to do a full on snorkel but I don't like the intake pipe running so low then having the opening right at the front of my P 1000 any tips or info would be most helpful

 

[Admin]

 

[ToddACimer]

I just built mine this weekend








2 90 degrees 3" elbows, 1 15" 3" pipe cut to 12.5" and 1 5" long 3" pipe. 3" intake inlet.

Break down of the parts and a link to order
2 of these
Hiwowsport 4-Ply High Performance 90 Degree Elbow Coupler Silicone Hose for Auto with T-clamps (3.0"(76mm)) https://www.amazon.com/dp/B074V6HJ7S/ref=cm_sw_r_cp_taa_QHUbDbYFN40CG

1 of these
15" Diameter 3" Length Aluminum Straight Pipe https://www.amazon.com/dp/B07MYK2195/ref=cm_sw_r_cp_taa_5IUbDbZ9QJ128

1 of these
Universal Black Snorkel Inlet Head 3"Inch Fit Off Road Mudding Air Intake Ram US | eBay

I used a section of 3" exhaust pipe to go through the hood. You will need 1 additional 3" clamp, 5 total

 

[GlockMeister]

not sure if I want to do a full on snorkel but I don't like the intake pipe running so low then having the opening right at the front of my P 1000 any tips or info would be most helpful

This eliminates the factory intake tube completely.
SNORKEL KIT for 2016, 2017, 2018, 2019 Honda Pioneer 1000-5 and 1000-3 UTVs | eBay